________________________________________________________________ | | | Compex RE100ATX 10/100 PCI Fast Ethernet Adapter | | (C) Copyright PDS, 2002. All Rights Reserved. | |______________________________________________________________| How to install RE100ATX-PCI adapter to SCO OpenServer 5.0 ========================================================= *NOTE: This driver is compatible with RE100ATX and RE100TX 1) Copy the setup file to the root of SCO Unix hard disk. e.g. cd / doscp a:/sco/setup . 2) Change Setup file to executable. e.g. chmod +x setup 3) Run setup e.g. ./setup Install Compex RE100ATX 10/100 PCI Fast Ethernet Adapter Driver. Please input source path ? ( ex: a:/sco/5.x) Type, A:/sco and press Enter key and message below display. Please wait to transfer files ................ Transfer End ............ 4) Execute "custom" A menu selection screen will be popped up. Using [->] key to move cursor to "Software" menu item then press [] key to get into pull down menu then move to "Install New..." then press [ENTER] key ----------- Begin Installation on scoopen ---------- | | | What host (machine) do you want to install from? | | | | --------------------------------------------------| | ³<*> From scoopen | | ³< > From another host | |---------------------------------------------------| | | | [ Continue ] [ Cancel ] [ Help] | ----------------------------------------------------| Select From scoopen and use [TAB] key to move cursor to [ Continue ] then press [ENTER] key and press [] key to get into pull down menu ------------ Select Media --------------------- | | | Insert media, and select media device. | |---------------------------------------------| | | | Media Device: Media Image | | ------------------------- | | | Floppy Disk Driver 0 | | | | *Media Images | | | ------------------------- | |---------------------------------------------| | [ Continue ] [ Help ] | ----------------------------------------------- -> Select "Media Image" and use [TAB] key to move cursor to [ Continue ] then press [ENTER] key then press [ENTER] key again ---------------------- Install Reference on scosysv ---------------------- | | | Installing: Compex RE100ATX 10/100Base-TX PCI Fast Ethernet Adapter | | | | Do you want a FULL or PARTIAL installation? | | | |------------------------------------------------------------------------| | [ Full ] [ Partial ] [ Cancel ] [ Help ] -------------------------------------------------------------------------- Using [TAB] key to move cursor to [ Full ] then press [ENTER] key After the installation progress the following message is displayed ------------ Question ---------- | Installation complete | |-------------------------------| | [ OK ] | |-------------------------------| Press [Enter] key and the selected adapter, Compex RE100TX 10/100Base-TX PCI Fast Ethernet is added to the package list Using [<-] key to move cursor back to "Host" menu item then press [] key to get into pull down menu then move to "Exit" then press [ENTER] key Now that the driver is installed in the system successfully. 4) Execute "netconfig" to configure the driver A menu selection screen will be popped up. At "Hardware" menu item press [] key to get into pull down menu then move to "Add new LAN adapter" then press [ENTER] key --------------------------- Add new LAN adapter ----------------------------- | Following adapters have been found: | |---------------------------------------------------------------------------| | Compex RE100TX 10/100Base-TX PCI Fast Ethernet adapter -PCI Bus#0, PCI# | | | | | |---------------------------------------------------------------------------| |[ Configure hardware not listed above... ] | |---------------------------------------------------------------------------| |[ Continue ] [ Cancel ] [ Help ] | |---------------------------------------------------------------------------- Use the Tab key to move to [Continue] and then press [ENTER] key. -------------------------------- Add Protocol -------------------------------- |Select one networking product to be added to: | | | |Compex RE100TX 10/100Base-TX PCI Fast Ethernet Adapter: | |----------------------------------------------------------------------------| | HW Compex RE100ATX 10/100Base-TX PCI Fast Ethernet Adapter | | - SCO IPX/SPX | | * - SCO TCP/IP | | | |----------------------------------------------------------------------------| | [ Add ] [ Cancel ] [ Help ] | ------------------------------------------------------------------------------ Using [] key to move cursor to "SCO TCP/IP" then press [ENTER] key. ----------------- SCO TCP/IP Configuration --------------- º | º Local Host Name: |scoopen_____________| [ Advanced ]| º IP Address: |192.168.0.100_______| Options... | º Netmask: |255.255.255.0_______| | ºBroadcast Address: |192.168.0.255_______| | º Domain Name: |scoopen.com_________| | º TCP connections: |256_________________| | º Pseudo ttys: |32__________________| | º | |---------------------------------------------------------| | [ OK ] [ Cancel ] [ Help ] | |---------------------------------------------------------| * Note:- the values above are just examples. Contact your administrator for the proper information for your network. Input the required information then use [TAB] key to move cursor to "OK" then press [ENTER] key. ----------------------------- Message ----------------------------------------- | The following products were successfully configured into the system | | SCO TCP/IP | | Compex RE100TX 10/100Base-TX PCI Fast Ethernet Adapter - PCI Bus#0,PCI Device| | | |------------------------------------------------------------------------------| |[ OK ] [ Help ] | |------------------------------------------------------------------------------| Press [ENTER] key At "Hardware" menu item press [] key to get into pull down menu then move to "Exit" then press [ENTER] key ------------------------ Question -------------------------- | The Unix Kernel must be re-linked before the changes | | made here will have an effect. | | Do you want to re-link the kernel now? | |----------------------------------------------------------| | [ YES ] [ NO ] | |----------------------------------------------------------| Press [ENTER] key Do you want this kernel to boot by default (y/n) y Do you want the kernel environment rebuilt (y/n) y 5) Reboot unix # shutdown -y -g0 6) On rebooting, Compex RE100ATX 10/100Base-TX PCI Fast Ethernet adapter will be initialized. Press Control-D to startup the server. Compex RE100ATX 10/100Base-TX PCI Fast Ethernet adapter is now ready to service the network. ------------------------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.