3D STRIKER Game Setting Utility
Version 1.0
Copyright (c) Quickshot Corporation 1997 All Rights Reserved.
Introductions
=============
This 3D STRIKER game setting utility is designed to provide the suggested
keyboard setting for some popular games.
Installation
============
By the time you have read to this point, you have probably already installed
the 3D STRIKER utility successfully. However, if you have not, here are the
installation procedures.
DOS users:
1). Insert the 3D STRIKER program diskette into the floppy drive.
2). Type INSTALL to run the 3D STRIKER installation program.
3). The installation program will copy the files to the directory 3DSTRKER.
4). The installation procedure is then completed.
Windows 3.1 users:
1). Insert the 3D STRIKER program diskette into the floppy drive.
2). In Windows, choose RUN from the Program Manager's File menu.
3). Type A:\Windows\setup.exe and click OK.
Windows 95 users:
1). Insert the 3D STRIKER program diskette into the floppy drive.
2). Select Run from the Start button.
3). Type A:\Windows\setup.exe and click OK.
Running 3DSTRKER
================
The 3DSTRKER is a DOS program and it can be executed within the MSDOS-windows
of Windows 95 or Windows 3.1. It can also be run in real DOS mode without
Windows.
1). Type 3DSTRKER to execute the utility for DOS users. Execute the 3DSTRKER program from
the 3DSTRKER program group for Windows users.
2). Inside the 3DSTRKER utility, you will find a game list.
3). Use the cursor key on the keyboard to choose the game to be configured.
4). Press Enter to select the game.
5). A menu of soundcards will be available.
6). Choose the soundcard that will be used with that game.
7). Type the name of the directory where the game's files located.
8). The 3DSTRKER utility will copy the keyboard configuration to that
directory.
9). Since this utility only sets the keyboard and soundcard configuration,
you may need to configure other devices such as display mode,
network, ....
(For those other setting, please check the games' manual)
10). If you want to quit this utility, simple press ESC on the keyboard and
then choose Yes to exit.
Games List
==========
There are 10 games configuration files included in this utility. They are:
1). Duke Nukem 3D
2). Descent II
3). Quake
4). Redneck Rampage
5). Skynet
6). DOOM II
7). Tomb Raider
8). Shadow Warrior
9). Blood
10). Fate
Technical Support
=================
If you find any problem, please contact our technical support personnel.
Tel. : (408)263-4163
Fax. : (408)263-4005
CompuServe : GO QSHOT
Internet : http://www.quickshot.com
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.