MAC = 1 MAC_PREFIX = 00:10:19 MAC_ADDRESS = 00:10:18:15:0a:6d POWER_DISSIPATED = 10:0:1:100 POWER_CONSUMED = 10:0:2:100 SYSTEM_VENDOR_ID = 14e4 SYSTEM_DEVICE_ID = 1644 SUBSYSTEM_VENDOR_ID = 14e4 SUBSYSTEM_DEVICE_ID = 1644 PXE = disable PXE_SPEED = auto WOL = disable CABLE_SENSE = disable PRODUCT_NAME = Broadcom Gigabit Ethernet Controller PART_NUMBER = BCM95700A7 ENGINEERING_CHANGE = 107070-26 MANUFACTURING_ID = 1455 ASSET_TAG = XYZ11334455 PART_REVISION = 01 FORCE_PCI = enable VOLTAGE_SOURCE = 1.8 LED_MODE = phy_mode2 MAX_PCI_RETRY = auto ASF = disable DUAL_MAC_MODE = normal MBA_BOOT_PROTOCOL = rpl MBA_BOOTSTRAP_TYPE = int18 MBA_DELAY_TIME = 10 EXPANSION_ROM_SIZE = 128K DESIGN_TYPE = nic VENDOR_SPECIFIC0 = vs0 VENDOR_SPECIFIC1 = vs1 REVERSE_NWAY = no WOL_LIMIT_10 = no FIBER_WOL_CAPABLE = no CLOCK_RUN_SETTING = disable DISABLE_POWER_SAVING = no HIDE_MBA_SETUP_PROMPT = disable MBA_SETUP_HOT_KEY = ctrl-b ENABLE_AUTO_POWERDOWN = no CAPACITIVE_COUPLING = disable PRI_SMB_ADDR = 1C SEC_SMB_ADDR = 1EDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.