---------------------------------------------------------- RELEASE NOTES FOR AMD USB Filter Driver for SB700/SB800/Hudson-1/RS880/Hudson-1/23/Bolton ---------------------------------------------------------- INTRODUCTION This document provides information about the current and previous updates to the driver package. Version 126.96.36.1995 05/07/2015 Add Windows 10 support Version 188.8.131.527 02/17/2014 Fixed bug - Non functional on some third party xHC controller Fixed bug - Display Corruption on Metro Camera w/ USB Webcam on DC Mode Version 184.108.40.2063 08/28/2012 Fixed bug - Composite webcam selective suspend WHQL failure Version 220.127.116.111 08/19/2012 Fixed bug - USB2.0 performance read value can reach 170Mbps Version 18.104.22.1686 07/03/2012 Fixed bug - 22.214.171.1242: NB & SB Registers are not set after disable/enable of Speaker Fixed bug - 126.96.36.1992: SB Register not set after couple of hot plugs of Speaker Fixed bug - WPM2328N:PLL shutdown feature&PC6 bit setting notworking after disable/enable BM Fixed bug - Some USB TV tuners screen lag on USB3.0 version 188.8.131.529 06/28/2012 Fixed bug - 184.108.40.206:CFOH bits are not setting during USB bulk transfer on xHC controller version 220.127.116.11 06/11/2012 Change BOOT_START to DEMAND_START Change BootFlags to 0x14 Fixed bug - System not shuting down/ rebooting gracefully if USBF installed on USB OS Drive version 18.104.22.168 05/29/2012 Fixed bug - 22.214.171.124:USB filter non functional behind hub on external USB controller Win8-869757: Windows2Go feature is impacted by USB filter version 126.96.36.199 05/22/2012 Fixed bug - Filter driver non functional behind External USB Hub Reduce stack size in ffdo function version 188.8.131.52 05/06/2012 Fixed bug - SB & NB registers fails to set with ISOC IN/OUT on EHCI ports Fixed bug - Filter driver non functional on external USB controller Reduce stack size in irp processing version 184.108.40.206 04/15/2012 Add support to Windows8 xHCI host controller Create BFDO only for host controller and AMD xHCI root hub version 220.127.116.11 03/31/2012 Fix a compatibility issue with some USB network adapter version 18.104.22.168 03/15/2012 Enabled 3rd party USB controller support on SB800 platform version 22.214.171.124 12/14/2011 Added a feature to enhance performance with USB mass storage device version 126.96.36.199 11/29/2011 Fix a webcam stutter porblem in WinXP Added support to partial 3rd party USB controllers Added Windows 8 support version 188.8.131.52 11/17/2011 Fix a yellow bang problem after resume from hiberation on specific platform Fix webcam stutter problem on specific CPU family version 184.108.40.206 09/13/2011 Fix safe remove issue with encrypted USB drive version 220.127.116.11 08/18/2011 Fix a compatibility issue version 18.104.22.168 08/08/2011 Fix a compatibility issue with specific USB network adapter version 22.214.171.124 07/15/2011 Added support for new North Bridge version 2.0.00.131 04/06/2011 Fix a BSOD issue during WLK1.6 testing version 2.0.00.129 03/14/2011 Fix the issue USB devices connected to USB3.0 port cannot be detected by USB trace. version 2.0.00.127 02/11/2011 USB Filter driver with architectural changes to provide the fix for Avermedia issue seen only with XHCI controller with Vista and XP OS.The SOlution applies to the all the OSs including Win7. Version 126.96.36.199 12/15/2010 Enabled back support for Llano + Hudson-2/3 by ensuring that USB filter never sits above Mass storage drivers. Enabled the filter driver fix for EHCI and OHCI also in addition to XHCI on Hudson-2/3 Version 188.8.131.52 12/07/2010 Enabled back support for Llano + Hudson-3 by moving the getting controller type information after detecting the ISOC stream. Which will ensure that we never call these functions from USB filter when sitting above mass storage devices and Card readers, basically for any NON ISOC capable devices. Version 184.108.40.206 11/29/2010 removed support for Llano/RS880 + Hudson-3 in order to get rid of BSOD which was appearing with card reader on AMD Platform. Version 220.127.116.11 09/30/2010 -Update USB filter to Disable PLL shutdown feature when ISO device is streaming and only when the streaming device is on XHCI controller. Enabled the above fix on Ontario + SB800 Also. Version 18.104.22.168 -Provided the fix for BSOD when WLK1.5 CSSIO DTM System submission run on SB800 based Platforms. Version 22.214.171.124 -Provided the fix for BSOD when the audio is played on to USB Nokia Bluetooth headphone. Version 126.96.36.199 -Fixed System hang while playing isoc stream with XP on Guam/croaker with USB filter 188.8.131.52 . Version 184.108.40.206 -Provided the fix for OHCI arbiter hanging due to long latency conditions on Alink . Version 220.127.116.11 - Fixed the issue with some softwares not detecting USB CD/DVD R/W drive when USB filter driver is installed. - Extended the USB filter driver support for SB800 Version 18.104.22.168 - Modified the driver to disable/enable ALink PLL turn off feature and Set/Reset(RS880 Only) Scratch bit during an ISOC stream is Active/Inactive on any of the connected USB devie. Version 22.214.171.124 - Added code to Set/Reset the scratch bit in the RS880 NB Config Space, on arrival and removal of ISOCH capable USB device. Version 126.96.36.199 - Modified the USBFilter driver act as bus upper filter on top of USBHub.sys. Version 188.8.131.52 - Added Support for RS880 Version 184.108.40.206 - Fixed a bug that caused the USB printer to stop working. - Fixed a bug related the USB 2.0 audio devices. Version 1.0.6.0005 - Initial Revision (c) Copyright 2011-2015 Advanced Micro Devices, Inc. All rights reserved. LIMITATION OF LIABILITY: THE MATERIALS ARE PROVIDED AS IS WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF THIRD-PARTY INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT SHALL AMD OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU. AMD does not assume any responsibility for any errors which may appear in the Materials nor any responsibility to support or update the Materials. AMD retains the right to make changes to its test specifications at any time, without notice. NO SUPPORT OBLIGATION: AMD is not obligated to furnish, support, or make any further information, software, technical information, know-how, or show-how available to you. U.S. GOVERNMENT RESTRICTED RIGHTS: The Materials and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to restrictions as set forth in FAR52.227014 and DFAR252.227-7013, et seq., or its successor. Use of the Materials by the Government constitutes acknowledgment of AMD’s proprietary rights in them.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.