92HDM4-2.INI Driver File Contents (R267815.exe)

[Actions]
1. none
[Models]
HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&SUBSYS_10280263=this  
HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&SUBSYS_10280265=this  
HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&SUBSYS_10280262=this  
HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&SUBSYS_10280264=this  
HDAUDIO\FUNC_01&VEN_111D&DEV_76B2=this
Default=this
[DelRegKeys]
HKR\Settings=yes
HKLM\Software\IDT\GlobalState=yes
[Apps]
[CopyFiles.32]
IDTSG.cpl    = 0x25
stlang.dll = 0x25
AESTCtrl.cpl = 0x25
AESTFltr.exe = 0x25
[CopyFiles.64]
IDTSG64.cpl    = 0x25
stlang64.dll = 0x25
AESTCt64.cpl = 0x25
AESTFl64.exe = 0x25
[StartServices.32]
stacsv.exe -r
[StartServices.64]
stacsv64.exe -r
[RegisterDlls.32]
STacAPI.dll
[RegisterDlls.64]
STaPI64x.dll
[HKLM\Software\IDT\State\Shared]
ShowEventDialog = dword: 1
HPSupport= dword: 0x01
SpkSupport= dword: 0x01
[HKLM\Software\IDT\Config\Shared]
Config_Oem      = dword: 2
PollingPeriod   = dword: 200
RecordPriority = dword: 1
[HKLM\Software\IDT\Config\STacsv]
HwSpkCfg       = dword: 1
MultiStream     = dword: 1
MicRetasking = dword: 0
[HKLM\Software\IDT\Config\SysTray.32]
ControlPanel    = "IDTSG.cpl"
HideTrayIcon   = dword: 1
Automatic      = dword: 0
[HKLM\Software\IDT\Config\SysTray.64]
ControlPanel    = "IDTSG64.cpl"
HideTrayIcon   = dword: 1
Automatic      = dword: 0
[HKLM\SOFTWARE\IDT\Config\EventExpressions]
Version=dword:1
[HKLM\SOFTWARE\IDT\Config\EventExpressions\JackPresensea]
110="if(GetPresence(10) == 1 || GetPresence(15) == 1,(BypassSystemEq(1)),(BypassSystemEq(0)))"
120="if(GetPresence(10) == 1 || GetPresence(15) == 1,(BypassSystemComp(1)),(BypassSystemComp(0)))"
[HKLM\SOFTWARE\IDT\Config\EventExpressions\JackPresensef]
110="if(GetPresence(10) == 1 || GetPresence(15) == 1,(BypassSystemEq(1)),(BypassSystemEq(0)))"
120="if(GetPresence(10) == 1 || GetPresence(15) == 1,(BypassSystemComp(1)),(BypassSystemComp(0)))"
[HKR]
CodecName = "92HD71B8x"
[HKR\Settings]
TraceFlags                           = dword: 0x89B3
Biostype1  = hex: 1
EnablePcBeepAtCd                     = hex: 1
AllowHpOnNonSupportingPin            = hex: 0
CPL_SaveExtraPower                   = hex: 1
CPL_MaySwitchExtAmpPowerState        = hex: 1
CPL_SecondsAfter                     = dword: 30 
EnableDLCDWA                         = hex: 1
PmEnabledWidget				= hex: 0A,0C,0D,0E,0F,0B
ShareSystemMicJackAsLine = hex: 1
AfgPowerStatePolicy = hex: 2
CPL_ControlAfgPowerState = hex: 0x1
KeepAnalogLoopbackAlwaysOn = hex: 0
DelayInMsAfterPortDisabling = dword: 0x40
SAEN = dword: 0x08
RenderPathOptimization = hex: 1
AEMicSource = dword: 0x3
DefaultMicPrecedence = hex: 30,21,2E 
[HKR\Settings\pin]
[HKR\Settings\Pin\0A]
CfgDflt = dword: 0x0421101F     
Action = hex: 81,0D,81,0F,80,00,87,00
ExtAmpCtrl = hex: 00,05,02
[HKR\Settings\Pin\0B]
PathNode 			= hex: 1A
Bias = hex: FF,04,02
[HKR\Settings\Pin\0C]
[HKR\Settings\Pin\0D]
CfgDflt = dword: 0x90110010     
[HKR\Settings\Pin\0E]
[HKR\Settings\Pin\0F]
CfgDflt = dword: 0x2301401F     
Action = hex: 81,0D,80,00,87,00
[HKR\Settings\Pin\14]
CfgDflt = dword: 0x400003F0     
[HKR\Settings\Pin\18]
CfgDflt = dword: 0x400003F0     
[HKR\Settings\Pin\19]
CfgDflt = dword: 0x400003F0     
[HKR\Settings\Pin\1E]
CfgDflt = dword: 0x0444131F     
[HKR\Settings\Pin\1F]
CfgDflt = dword: 0x400000F0     
[HKR\Settings\Pin\20]
CfgDflt = dword: 0x400000F0     
[HKR\Settings\Pin\27]
CfgDflt = dword: 0x90300022     
[HKR\Settings\GPIO]
00					= hex: 82
MAEOpts = dword: 0x10
[HKR\Settings\Connselector]
[HKR\Settings\filter\rear]
UniqueID                             = hex: 0
LegacyIoctlHere                      = hex: 1
Associations                         = hex: 1,2,3
EnableInputMonitor                   = hex: 0
RecMonitorMute                       = hex: 1
RecordingMux                         = dword: 1
MasterVolumeFixedLevel               = dword: 0
FixedLevelOnLineOut                  = hex: 0
EnableVolumeKnob                     = hex: 0
DisableSpdifControl                 	= hex: 0
SpdifOutCtrl	         	    	= hex: 1
DisableMicBoost                      = hex: 0
Mic2Boost                             = hex: 1
MicBoost                             = hex: 0
EnableSetFormatSupport               = hex: 1
EnableHwSpeakerConfigurationSupport  = hex: 0
EnabledPcmRenderBitsAndRates         = dword: 0x1F0FFF
EnabledPcmCaptureBitsAndRates        = dword: 0x1F0FFF
UserEnabledDacBitsAndRates           = dword: 0x1F0FFF
EnabledNonPcmBitsAndRates            = dword: 0x20040
ZeroPcmBitsAndRates                  = dword: 0x20040
DisableNonPcmPin                     = hex: 0
Mixer = hex: 0x17
DisableCDInFromRender = hex: 1
DisableCDInFromCapture = hex: 1
PCBeepMute				= hex: 0
PCBeepVolume				= dword: 0xfffb0265
DigitalRecordingLevel = hex: 0
EnableIntSpkrMute			= hex: 1 
DisableLineInFromRender = hex: 1
DisableMicInFromRender			= hex: 1
[HKR\Settings\filter\rear\plugins]
RegVersion                              = dword: 1
[HKR\Settings\filter\rear\plugins\Render]
[HKR\Settings\filter\rear\TopoNames]
MicIn                    = "{4B33E924-E22C-48b4-B028-4069442FD3BD}"   
Mic3In                     = "{9C56BB03-C758-4e8b-A23A-752D5968EA2D}"   
Mic2In                    = "{0AA49151-C622-4209-BC30-E81D62D23F13}"   
MixIn   		  = "{88C02F6A-D1E7-4fe3-A506-9E0AE51D1234}"
[HKR\Settings\filter\Rear\MaxLvlLimiters]
MicBoostLevel                		= dword: 0x000a0000
[HKLM\Software\IDT\Config\UI]
Config_Tab                           = dword: 0x8
Config_Adv                           = dword: 0x0101
Config_Pwr                           = dword: 0x19
[HKLM\Software\Microsoft\Windows\CurrentVersion\App Paths\AESFl64.exe]
(Default) = "c:\windows\system32"
Path = "%systemroot%\system32"
[HKLM\Software\Microsoft\Windows\CurrentVersion\App Paths\AESFltr.exe]
(Default) = "c:\windows\system32"
Path = "%systemroot%\system32"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.03