W92HDM42.INI Driver File Contents (R267814.exe)

[Models]
HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&SUBSYS_10280263=this
HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&SUBSYS_10280265=this
HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&SUBSYS_10280262=this
HDAUDIO\FUNC_01&VEN_111D&DEV_76B2&SUBSYS_10280264=this
HDAUDIO\FUNC_01&VEN_111D&DEV_76B0=this
HDAUDIO\FUNC_01&VEN_111D&DEV_76B2=this
Default=this
[DelRegKeys]
HKR\Settings=yes
HKLM\Software\IDT\GlobalState=yes
[APPS]
[NoVistaUI]
[CopyFiles.32]
stlang.dll = 0x25
idtsg.cpl = 0x25
[CopyFiles.64]
stlang64.dll = 0x25
idtsg64.cpl = 0x25
[StartServices.32]
STacSV -r
aestsrv.exe -install
[StartServices.64]
STacSV64 -r
AESTSr64.exe -install
[StopServices.32]
STacSV -u
AESTSrv.exe -remove
[StopServices.64]
STacSV64 -u
AESTSr64.exe -remove
[ReplaceDlls.32]
stapo.dll = 0x25
stcplx.dll = 0x25
aestacap.dll = 0x25
aestaren.dll = 0x25
aestecap.dll = 0x25
[ReplaceDlls.64]
stapo64.dll = 0x25
stcplx64.dll = 0x25
AESTAC64.dll = 0x25
AESTAR64.dll = 0x25
AESTEC64.dll = 0x25
[HKLM\Software\IDT\State\Shared]
ShowEventDialog = dword: 1
HPSupport= dword: 0x01
SpkSupport= dword: 0x01
[HKLM\Software\IDT\State\UI]
MultiStream     = dword: 1
[HKLM\Software\IDT\Config\Shared]
Config_Oem      = dword: 2
PollingPeriod   = dword: 1000
[HKLM\Software\IDT\Config\STacsv]
HwSpkCfg       = dword: 1
MultiStream     = dword: 1
MicRetasking = dword: 0
[HKLM\Software\IDT\Config\SysTray.32]
ControlPanel    = "IDTCPL.cpl"
HideTrayIcon   = dword: 1
Automatic      = dword: 0
RecordPriority = dword: 1
[HKLM\Software\IDT\Config\SysTray.64]
ControlPanel    = "IDTCPL64.cpl"
HideTrayIcon   = dword: 1
Automatic      = dword: 0
RecordPriority = dword: 1
[StartConsoleApps.32]
IDTPIMA.exe -mode 0 -submode 2 -defaultCapture 0xC -timeout 240
IDTPIMA.exe -mode 0 -submode 2 -defaultRender 0xD -timeout 240
IDTPIMA.exe -mode 2 -endpointAssoc 2 -enable 1 -endpointSequence 16 -timeout 240
[StartConsoleApps.64]
IDTPMA64.exe -mode 0 -submode 2 -defaultCapture 0xC -timeout 240
IDTPMA64.exe -mode 0 -submode 2 -defaultRender 0xD -timeout 240
IDTPMA64.exe -mode 2 -endpointAssoc 2 -enable 1 -endpointSequence 16 -timeout 240
[HKLM\SOFTWARE\IDT\Config\EventExpressions]
Version=dword:1
[HKLM\SOFTWARE\IDT\Config\EventExpressions\StreamStart0005]
010="msenabled=GetGlobalRegDword("MultiStream",0)"
020="if((msenabled),(SetDeviceType(10,2) && SetVerified(10,1)),(SetDeviceTypeSlaved(10,2) && SetVerified(10,1)))"
030="if((msenabled),(MutePin(13,0)),MutePin(13,1))"
040="pluggedin10=GetPresence(10)"
[HKLM\SOFTWARE\IDT\Config\EventExpressions\StreamStop0005]
010="SetDeviceTypeSlaved(10,2) && SetVerified(10,1)"
020="pluggedin10=GetPresence(10)"
030="muterear=pluggedin10"
040="if((muterear),(MutePin(13,1)),(0))"
[HKLM\SOFTWARE\IDT\Config\EventExpressions\JackPresenseA]
010="if(GetPresence(10) == 1 || GetPresence(15) == 1,(BypassSystemEq(1)),(BypassSystemEq(0)))"
020="if(GetPresence(10) == 1 || GetPresence(15) == 1,(BypassSystemComp(1)),(BypassSystemComp(0)))"
030="slaved10=(JackSequence(10)==15)"
040="pluggedin10=GetPresence(10)"
050="muteinternalandf=(slaved10 && (pluggedin10))"
060="if((muteinternalandf),(MutePin(13,1)&&MutePin(15,1)),(0))"
070="unmuteinternalandf=(slaved10 && (!pluggedin10))"
080="if((unmuteinternalandf),(MutePin(13,0)&&MutePin(15,0)),(0))"
[HKLM\SOFTWARE\IDT\Config\EventExpressions\ServiceStartup]
010="pluggedin10=GetPresence(10)"
020="muterear=pluggedin10"
030="if((muterear),(MutePin(13,1)),(0))"
070="if(GetPresence(11)==0 && GetPresence(14)==0,(SetDefaultDevice(1,12,0)),(0))"
[HKLM\SOFTWARE\IDT\Config\EventExpressions\JackPresenseF]
010="if(GetPresence(10) == 1 || GetPresence(15) == 1,(BypassSystemEq(1)),(BypassSystemEq(0)))"
020="if(GetPresence(10) == 1 || GetPresence(15) == 1,(BypassSystemComp(1)),(BypassSystemComp(0)))"
[HKLM\SOFTWARE\IDT\Config\EventExpressions\JackPresenseB]
010="MicbPlugged = GetPresence(11)"
020="currbdev=GetDefaultDevice(2,1)"
030="prevbdev=GetGlobalRegDword("previousDefaultDevice", 0)"
040="if( MicbPlugged , ( SetGlobalRegDword("previousDefaultDevice", currbdev) ) , ( 0 ) )"
050="if( MicbPlugged , ( SetDefaultDevice(1,11,0) ) , ( 0 ) )"
060="if( ( !MicbPlugged && prevbdev ) , ( SetDefaultDevice(2,prevbdev,0) ) , ( 0 ) )"
070="if(GetPresence(11)==0 && GetPresence(14)==0,(SetDefaultDevice(1,12,0)),(0))"
[HKLM\SOFTWARE\IDT\Config\EventExpressions\JackPresenseE]
010="MicePlugged = GetPresence(14)"
020="curredev=GetDefaultDevice(2,1)"
030="prevedev=GetGlobalRegDword("previousDefaultDevice", 0)"
040="if( MicePlugged , ( SetGlobalRegDword("previousDefaultDevice", curredev) ) , ( 0 ) )"
050="if( MicePlugged , ( SetDefaultDevice(1,14,0) ) , ( 0 ) )"
060="if( ( !MicePlugged && prevedev ) , ( SetDefaultDevice(2,prevedev,0) ) , ( 0 ) )"
070="if(GetPresence(11)==0 && GetPresence(14)==0,(SetDefaultDevice(1,12,0)),(0))"
[HKLM\SOFTWARE\IDT\Config\EventExpressions\DevPresence0005]
010="HDMIPlugged = GetDevicePresence(0,5,0)"
020="if(HDMIPlugged == 1,(SetDefaultDevice(0,5,0)),(SetDefaultDevice(0,1,0)))"
[HKR]
CodecName = "92HD71B8x"
[HKR\Settings]
TraceFlags			= dword: 0x89B3
CPL_SaveExtraPower		= hex: 1
CPL_MaySwitchExtAmpPowerState	= hex: 1
EnablePcBeepAtCd  = hex: 1
Biostype1 = hex: 1
PmEnabledWidget				= hex: 0A,0C,0D,0E,0F,0B
CPL_SecondsAfter = dword: 30
ShareSystemMicJackAsLine = hex: 1
AfgPowerStatePolicy = hex: 2 
CPL_ControlAfgPowerState = hex: 0x1
KeepAnalogLoopbackAlwaysOn = hex: 0
DelayInMsAfterPortDisabling = dword: 0x40
RenderPathOptimization = hex: 1
EnableDevicePresenceAutoSearch = hex: 0 
KeepPCBeepAlwaysOn = hex: 1		
[HKR\Settings\pin]
[HKR\Settings\Pin\0A]
CfgDflt = dword: 0x04211050
CfgCurr = dword: 0x0421101F
ExtAmpCtrl			= hex: 00,05,02
AltCfg = hex: 50,10,21,04,1F,10,21,04
[HKR\Settings\Pin\0B]
PathNode 			= hex: 1A
Bias = hex: FF,04,02
Action = hex: 0A,0B
[HKR\Settings\Pin\0C]
[HKR\Settings\Pin\0D]
CfgDflt = dword: 0x90170110
[HKR\Settings\Pin\0E]
PathNode 			= hex: 0x1B
[HKR\Settings\Pin\0F]
CfgDflt = dword: 0x2321121F
Action 				= hex: 81,0D
[HKR\Settings\Pin\14]
CfgDflt = dword: 0x40F000F0
[HKR\Settings\Pin\18]
CfgDflt = dword: 0x40F000F0
[HKR\Settings\Pin\19]
CfgDflt = dword: 0x40F000F0
[HKR\Settings\Pin\1E]
CfgDflt = dword: 0x034413B0
[HKR\Settings\Pin\1F]
CfgDflt = dword: 0x40F000F0
[HKR\Settings\Pin\20]
CfgDflt = dword: 0x40F000F0
[HKR\Settings\Pin\27]
CfgDflt = dword: 0x90300022
[HKR\Settings\GPIO]
00					= hex: 0x82
[HKR\Settings\Connselector]
[HKR\Settings\filter\SpeakerHp]
UniqueID				= hex: 0
LegacyIoctlHere				= hex: 1
Associations				= hex: 1,2,B
DigitalVolumeControl			= hex: 0
EnableSetFormatSupport			= hex: 1
EnabledPcmRenderBitsAndRates		= dword: 0x1F0FFF
EnabledNonPcmBitsAndRates		= dword: 0x20040
ZeroPcmBitsAndRates			= dword: 0x20040
DisableNonPcmPin			= hex: 1
MasterControlsIndependentMixerInputs	= hex: 1
EnableIntSpkrMute			= hex: 1  
PCBeepMute				= hex: 0
PCBeepVolume				= dword: 0xfffb0265
RenderOnly  = hex: 1
DisableCDInFromRender = hex: 1
Mixer = hex: 0x17
DisableMic2InFromRender			= hex: 1
[HKR\Settings\filter\SpeakerHp\TopoNames]
SpdifOut   				= "{D066DE45-A1AF-43ae-9E1D-C04BA43AD3BB}"  
[HKR\settings\filter\HpOut]
UniqueID				= hex: 2
LegacyIoctlHere				= hex: 0
Associations				= hex: 5
EnabledPcmRenderBitsAndRates		= dword: 0x1F0FFF
[HKR\settings\filter\MuxedIn]
UniqueID				= hex: 1
LegacyIoctlHere				= hex: 0
EnableCompositeMuxAndAdcCtrl		= hex: 0
Associations				= hex: 2
EnabledPcmCaptureBitsAndRates		= dword: 0x0a0060
MicInRecVolume				= dword: 0x108000
Mic2InRecVolume				= dword: 0x10a5a5
MixInRecVolume = dword: 0x0005886a  
StereoMixNid                         = hex: 0x17
DisableCDInFromCapture = hex: 1
[HKR\Settings\filter\MuxedIn\MaxLvlLimiters]
MicBoostLevel				= dword: 0x00140000
Mic2BoostLevel				= dword: 0x00140000
MixInRecVolume    = dword: 0x00068000
[HKR\Settings\filter\MuxedIn\TopoNames]
MicIn					= "{CD2AF943-305E-4786-BCFA-1BE25DECACDB}"   
Mic2In    				= "{0AA49151-C622-4209-BC30-E81D62D23F13}"   
MixIn                               = "{88C02F6A-D1E7-4fe3-A506-9E0AE51D1234}"  
[HKR\settings\filter\MicIn]
UniqueID				= hex: 4
LegacyIoctlHere				= hex: 0
Associations				= hex: 3
EnabledPcmCaptureBitsAndRates		= dword: 0x0a0060
DisableMicBoost                      	= hex: 0
MicInRecVolume				= dword: 0x111b84
[HKR\Settings\filter\MicIn\TopoNames]
MicIn                                	= "{9C56BB03-C758-4e8b-A23A-752D5968EA2D}"  
[HKR\Settings\filter\MicIn\MaxLvlLimiters]
MicBoostLevel                		= dword: 0x00140000  
[HKLM\Software\IDT\APO\GFX\SpeakerHp\Plugins]
EndpointId = dword: 0xFFFFFFFF
[HKLM\software\IDT\Apo\GFX\SpeakerHp\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{637c490d-eee3-4c0a-973f-371958802da2}"
[HKLM\software\IDT\Apo\LFX\SpeakerHp\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{62dc1a93-ae24-464c-a43e-452f824c4250}"
[HKLM\software\IDT\Apo\GFX\HpOut\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{637c490d-eee3-4c0a-973f-371958802da2}"
[HKLM\software\IDT\Apo\LFX\HpOut\plugins\MSAPO]
idEffect = dword: 50
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{62dc1a93-ae24-464c-a43e-452f824c4250}"
[HKLM\SOFTWARE\IDT\Apo\GFX\SpeakerHp\plugins\AndreaAPO]
idEffect = dword: 80
idEffectType = dword: 50
load = dword: 1
order = dword: 9
ApoClsId = "{84585C01-7301-4da2-887E-AE94A936B992}"
[HKLM\SOFTWARE\IDT\Apo\GFX\HpOut\plugins\AndreaAPO]
idEffect = dword: 80
idEffectType = dword: 50
load = dword: 1
order = dword: 9
ApoClsId = "{84585C01-7301-4da2-887E-AE94A936B992}"
[HKLM\software\IDT\Apo\LFX\MicIn\plugins\AndreaAPO]
idEffect = dword: 80
idEffectType = dword: 50
load = dword: 1
order = dword: 5
ApoClsId = "{A6A87D18-FE84-468b-A56F-444E54F367BB}"
[HKLM\Software\IDT\Config\UI]
Config_Tab                           = dword: 0x8
Config_Adv                           = dword: 0x0101
Config_Pwr                           = dword: 0x19
[HKLM\Software\IDT\Config\UI\Minipanels\Minipanel1]
InstallPath="NONE"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.05