This firmware download utility runs in DOS. 1. Unzip the file F3_Patch.zip to your bootable USB key 2. Run the F3_Patch.exe file from your bootable key 3. You will notice that the current FW is 1AJ10001, after flash it will become 1AJ10002 (but this can only be done after reboot and re-run step 2) 4. Reboot the system after flashed 5. Please take note the PC will halted sometimes as the BIOS is trying to detect the HDD, force reboot again if you see this situation 6. Once reboot successful, you will be able to go into Windows, Windows will detect your new HDD again 7. Last reboot from the Windows after detection completed, restart and FW is now 002 versionDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.