message.txt Driver File Contents (mast-win-mg3100-1_1-ucd.exe)

[dialog1]
title=Âûáîð ÿçûêà ðóêîâîäñòâà ïî íàñòðîéêå
label1=Âûáîð ÿçûêà
label2=OK
label3=ÎÒÌÅÍÀ

[dialog2]
title=Âûáîð ðóêîâîäñòâà ïî íàñòðîéêå
label1=Âûáîð èñïîëüçóåìîé ÎÑ
label2=Âûáîð ðóêîâîäñòâà ïî íàñòðîéêå
label3=OK
label4=ÎÒÌÅÍÀ

[dialog3]
title=Âûáîð ðóêîâîäñòâà ïî íàñòðîéêå
label1=Âûáîð ðóêîâîäñòâà ïî íàñòðîéêå
label2=OK
label3=ÎÒÌÅÍÀ

#Translation not necessary
[dialog4]
title=Âûáîð ðóêîâîäñòâà ïî íàñòðîéêå
label1=Âûáîð ðóêîâîäñòâà ïî íàñòðîéêå
label2=OK
label3=ÎÒÌÅÍÀ

#Translation not necessary
[dialog5]
title=Âûáîð ðóêîâîäñòâà ïî íàñòðîéêå
label1=Selection of OS Being Used
label2=OK
label3=ÎÒÌÅÍÀ

[dialog10]
title=Óñòàíîâêà ðóêîâîäñòâà ïî íàñòðîéêå
label1=\n\nÓñòàíàâëèâàåòñÿ ðóêîâîäñòâî ïî íàñòðîéêå.\n\n             Ïîäîæäèòå...

[dialog11]
title=Ëèöåíçèîííîå ñîãëàøåíèå äëÿ ðóêîâîäñòâà ïî íàñòðîéêå
header=Ïåðåä óñòàíîâêîé ðóêîâîäñòâà ïî íàñòðîéêå âíèìàòåëüíî ïðî÷èòàéòå ïðåäñòàâëåííîå íèæå ëèöåíçèîííîå ñîãëàøåíèå.
footer=Åñëè âû ïðèíèìàåòå óñëîâèÿ ñîãëàøåíèÿ, íàæìèòå êíîïêó [Äà]. Åñëè âû íàæìåòå êíîïêó [Íåò], ýòî ïðîãðàììíîå îáåñïå÷åíèå íå áóäåò óñòàíîâëåíî.
label1=Äà
label2=Íåò

[dialog12]
title=Óñòàíîâêà ñðåäñòâà ïðîñìîòðà ðóêîâîäñòâà
label1=\n\n       Óñòàíàâëèâàåòñÿ ñðåäñòâî ïðîñìîòðà ðóêîâîäñòâà.\n\n             Ïîäîæäèòå...

[message]
msg1=Íåâîçìîæíî íàéòè ïðèëîæåíèå Microsoft Internet Explorer, ïîääåðæèâàåìîå ðóêîâîäñòâîì ïî íàñòðîéêå. Äëÿ óñòàíîâêè ðóêîâîäñòâà ïî íàñòðîéêå íåîáõîäèìî óñòàíîâèòü Microsoft Internet Explorer 6.0 èëè áîëåå ïîçäíåé âåðñèè.
msg2=Ýòî ðóêîâîäñòâî ïî íàñòðîéêå ñåé÷àñ îòêðûòî. Çàêðîéòå ðóêîâîäñòâî ïî íàñòðîéêå è ïîâòîðèòå ïîïûòêó.
msg3=Óñòàíîâèòü Ðóêîâîäñòâî íà Âàø êîìïüþòåð? Ïîñëå óñòàíîâêè Ðóêîâîäñòâà íà êîìïüþòåð äëÿ åãî ïðîñìîòðà êîìïàêò-äèñê áîëåå íå íóæåí.
msg4=Íå óäàåòñÿ çàïóñòèòü áðàóçåð.
msg5=Çàäàéòå êàòàëîã äëÿ óñòàíîâêè.
msg6=Ïðîöåññ óñòàíîâêè áóäåò ïðåêðàùåí.
msg7=Ïðîèçîøëà îøèáêà. Ïðîöåññ óñòàíîâêè áóäåò ïðåêðàùåí.
msg8=Íåäîñòàòî÷íî ìåñòà íà æåñòêîì äèñêå. Äëÿ óñòàíîâêè ðóêîâîäñòâà ïî íàñòðîéêå òðåáóåòñÿ %d ÌÁ ñâîáîäíîãî ïðîñòðàíñòâà íà æåñòêîì äèñêå. Îñâîáîäèòå ìåñòî è ïîâòîðèòå óñòàíîâêó.
msg9=Ðóêîâîäñòâî ïî íàñòðîéêå óæå óñòàíîâëåíî. Îòêðûòü óñòàíîâëåííîå ðóêîâîäñòâî ïî íàñòðîéêå? 
msg10=Îøèáêà óñòàíîâêè.
msg11=Îòêðûòü óñòàíîâëåííîå ðóêîâîäñòâî ïî íàñòðîéêå? 
msg12=Ðóêîâîäñòâî ïî íàñòðîéêå óæå óñòàíîâëåíî.
msg13=Íåâîçìîæíî îòêðûòü íåñêîëüêî ðóêîâîäñòâ ïî íàñòðîéêå.
msg14=Çàäàéòå êàòàëîã äëÿ óñòàíîâêè
msg15=Èäåò êîïèðîâàíèå %s.
msg16=Óñòàíîâêà îòìåíåíà èëè âûïîëíåíà íåóñïåøíî.
msg17=Óäàëèòü
msg18=Óñòàíîâêà óñïåøíî çàâåðøåíà.
msg19=Ïîëíîñòüþ óäàëèòü ðóêîâîäñòâî ïî íàñòðîéêå?
msg20=Èäåò îáðàáîòêà...
msg21=Ýòî ðóêîâîäñòâî ïî íàñòðîéêå ñåé÷àñ îòêðûòî. Çàêðîéòå ðóêîâîäñòâî ïî íàñòðîéêå è ïîâòîðèòå ïîïûòêó.
msg22=Åñëè âû íå ïðèíèìàåòå óñëîâèÿ ëèöåíçèîííîãî ñîãëàøåíèÿ, ýòî ïðîãðàììíîå îáåñïå÷åíèå íå áóäåò óñòàíîâëåíî. ÎÊ?
msg23=Èäåò êîïèðîâàíèå ôàéëîâ.

#Translation not necessary
[system]
alt1=An invalid section name was specified for StartHtm.ini. Correct the setting. (Err:1)
alt2=An invalid keyword name was set for StartHtm.ini. Correct the setting. (Err:2)
alt3=Memory could not be allocated. Processing cannot be continued. (Err:3)
alt4=The language that was selected in the language selection dialog box does not match the CD directory configuration or does not exist. (Err:4)
alt5=No path was set to Setup Guide identification name in [contents-path] section of StartHtm.ini. (Err:5)
alt6=A path that was set to the Setup Guide identification name in the [contents-path] section of StartHtm.ini has an incorrect structure. (Err:6)
alt7=The structure of the Setup Guide identification name in the [contents-path] section of StartHtm.ini is incorrect. (Err:7)
alt8=Messages cannot be obtained because there is not appropriate section in the message file. (Err:8)
alt9=The language information in the third parameter does not match the language directory prepared in the CD. (Err:9)
alt10=The WWWMENU folder that should have been prepared in the CD does not exist or cannot be copied. (Err:10)
alt11=Starthtm cannot be operated because there is no language setting in the [contents] section of StartHtm.ini. (Err: 11)
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.09