******************************************************************************
* *
* SiS630/540 Integrated Lan Drivers *
* Installation and Usage (May. 22, 2000) *
* *
* * All brand or product names mentioned are trademarks or *
* registered trademarks of their respective holders. *
* *
******************************************************************************
******************************************************************************
******************************************************************************
* Introduction *
******************************************************************************
The contain of this document included SiS630/540 Lan Driver installation,
usage and release information.
******************************************************************************
* Table of Contents *
******************************************************************************
This document contains the following sections:
1. SiS630/540 Lan Drivers Contents
2. System Requirements
3. SiS630/540 Lan Driver Setup & Usage Procedures
******************************************************************************
* 1. SiS630/540 Lan Drivers Contents *
******************************************************************************
SiS630/540 LAN Drivers Package includes one CD-Title and one update package.
(For Rev. 1.09.02, Date: 05/22/2000)
SiS630/540 Lan Drivers Package Contents
Including the following file and sub-directories:
README.TXT : ASCII text file. This readme file.
Diag.txt : ASCII text file. Readme of Diagnostic Program.
Diag.exe : Diagnostic program.
NWSERVER.50 <DIR>: Contains a server driver and LDI import file for loading
into a NetWare 5.0 Server.
NWSERVER.41X <DIR>: Contains a server driver, LDI import file, and appropriate
.NLMs for loading into a NetWare 4.10 Server.
NWSERVER.42 <DIR>: Contains a server driver, LDI import file, and appropriate .NLMs
for loading into a NetWare 4.2 Server.
NWSERVER.312 <DIR>: Contains a server driver, LDI import file, and appropriate
.NLMs for loading into a NetWare 3.12 server.
NWCLIENT <DIR>: Contains DOS and OS/2 NetWare client drivers, a sample
NET.CFG file, and a .INS NWCLIENT import file.
WIN95 <DIR>: NDIS 3 driver for Windows 95 installation.
WIN95.SR2 <DIR>: NDIS 4 driver for Windows 95 OSR2 installation.
WIN98 <DIR>: NDIS 5 driver for Windows 98 installation.
WIN98LED <DIR>: NDIS 5 driver for Windows 98 installation. A software LED
utility can be used to determine current speed and duplex
mode.
NT40 <DIR>: NDIS 4 driver for Windows NT 4.0 installation.
Win2000 <DIR>: NDIS 5 driver for Windows 2000 installation.
CLIENT32 <DIR>: ODI Driver for Novell Client32 in DOS/Windows 3.x and
Windows 95.
NDIS2\DOS <DIR>: DOS NDIS 2.x driver for non-LAN Manager installations. It
can support Microsoft client, Windows for workgroup 3.11
and IBM LAN Services v4.x.
NDIS2\OS2 <DIR>: OS/2 NDIS 2.x driver for OS/2 MPTS installations.
PKTDRV <DIR>: DOS packet driver
SCO5 <DIR>: SCO OpenServer 5.0.0 driver
MSLANMAN.DOS <DIR>: Microsoft LAN Manager driver.
WFW311 <DIR>: NDIS 3 driver for Windows for Workgroups 3.11 installation.
******************************************************************************
* 2. System Requirements *
******************************************************************************
This section describes system requirements for the SiS630/540 Lan Driver
installationn and usage.
1. The hardware system must contain a SiS630/540 chipset with Lan function
enabled.
2. Mouse is optional.
******************************************************************************
* 3. SiS630/540 Lan Driver Setup & Usage Procedures *
******************************************************************************
1. Please refer to the README.TXT file in each directory.
2. Install Windows9x/2000 driver with setup utility(setup.exe).
For Windows 9X:
(1). If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the PCI Ethernet Controller, you should
click "Next" until "Finish" is clicked without specifying location
of the driver. You will see the "PCI Ethernet Controller" in the
Device Manager.
(2). Then you can install the driver with "setup" or "setup -s" command:
a) setup: The Install shield will prompt you the steps to install
the driver.
b) setup -s: The Install shield will complete the installation
without prompting you any instruction.
You need to reboot the system immediately after the Install shield
completes the installation.
(3). Do not click "Cancel" during New Hardware Wizard searches for the
driver.
(4). After remove the driver, please restart the system immediately.
For Windows 2000:
Install the driver with "setup" or "setup -s" command:
(1) setup: The Install shield will prompt you the steps to install
the driver.
(2) setup -s: The Install shield will complete the installation
without prompting you any instruction.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.