SB92xxHostUsbSerial.inf Driver File Contents (WiHD_W8.14_X01_A00_Setup-9T3H5_ZPE.exe)

; SB92xxHostUsbSerial.inf
;
; Installation file (.inf) for the USB Serial device driver.
;
; This file supports:
;     Windows 7 x64

[Version]
Signature="$Windows NT$"
Provider=%S_Provider%
ClassGUID={4d36e978-e325-11ce-bfc1-08002be10318}
Class=Ports
CatalogFile=SiBEAMxx.cat
DriverVer=02/19/2011,2.1.0.0

;
; Driver information
;

[Manufacturer]
%S_Mfg%=_Devices, ntamd64

[_Devices.NT] 
%S_DeviceDesc1%=Install,USB\VID_1A4A&PID_6320, USB\VID_1A4A&PID_6325

[_Devices.NTamd64] 
%S_DeviceDesc1%=Install,USB\VID_1A4A&PID_6320, USB\VID_1A4A&PID_6325

;
; General installation section
;

[Install.ntamd64]
CopyFiles=_CopyFiles_sys
AddReg=Common_AddReg

[Install.ntamd64.HW]
AddReg=_AddReg_Param

;
; Service Installation
;

[Install.ntamd64.Services]
AddService = %S_ServiceName%, 0x00000002 , Install_Service_Inst, Install_EventLog_Inst
AddReg = _AddRegService

[Install_Service_Inst]
ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
StartType      = 3                  ; SERVICE_DEMAND_START
ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
ServiceBinary  = %12%\%S_DriverName%.sys


[Install_EventLog_Inst]
AddReg = Install_EventLog_AddReg

[Install_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%SystemRoot%\System32\IoLogMsg.dll;%SystemRoot%\System32\drivers\%S_DriverName%.sys"
HKR,,TypesSupported,0x00010001,7


[_AddRegService]
HKR,,Parameters,,,


[_AddReg_Param]
; *********************************************************************
; *** the read buffer size grater than the FIFO size requires short ***
; *** packets from the device, see documentation for details!       ***
; *********************************************************************
HKR,,ReadBufferSize,  %REG_DWORD%, 1024
HKR,,WriteBufferSize, %REG_DWORD%, 1024
HKR,,UseLogicBuffer,  %REG_DWORD%, 0
HKR,,ReadBufferCount, %REG_DWORD%, 3
HKR,,WriteBufferCount,%REG_DWORD%, 3
HKR,,SendLineCoding,  %REG_DWORD%, 1
HKR,,SendLineState,   %REG_DWORD%, 1
HKR,,SendBreak,       %REG_DWORD%, 1

; 0 - CDCACM, 1 - Bulk Only, 2 - Bulk special, 3 - automatic
HKR,,OperationMode,%REG_DWORD%, 3

; set this to 0 to suppress the Clear Feature Endpoint Halt during Open and Wakeup
; this does not work on Windows 2000!
HKR,,ClearFeatureOnStart,%REG_DWORD%, 1
HKR,,VendorPipeReset,%REG_DWORD%, 0

; default serial line states reported in bulk only mode or 
; if the device never updates the status values
; use a or'ed value of: CTS=0x10, DSR=0x20, RI=0x40, DCD=0x80
HKR,,DefaultLineState,%REG_DWORD%, 0x10

; the next line enables the private interface, comment it, if it is not required
; create a new GUID and use the new GUID instead of this
; use the new GUID as an argument to CPortInfo::EnumeratePorts();
; HKR,,DriverUserInterfaceGuid,%REG_SZ%,"{40994DFA-45A8-4da7-8B58-ACC2D7CEA825}"
HKR,,DriverUserInterfaceGuid,%REG_SZ%,"{3E0D5E80-A949-4626-B119-BC1A8D25F71F}"

HKR,,StaticDeviceObject,%REG_DWORD%,0
HKR,,ClearRtsDtrOnClose,%REG_DWORD%,0
; 0 - user timeout with STATUS_TIMEOUT, no bytes transferred
; 1 - emulate send with transfer time, STATUS_SUCCESS, all bytes transferred
HKR,,DisConWriteMode,%REG_DWORD%,0

; the default prefix for the device object
HKR,,DeviceObjectName,%REG_SZ%,"thcdcacm"


[Common_AddReg]
; is a serial port
HKR,,PortSubClass,1,01
; property page, system default
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

[DestinationDirs]
DefaultDestDir   = 12
_CopyFiles_sys = 12

;
; Source file information
;

[SourceDisksNames.amd64]
1 = %S_DiskName%,,,""

[SourceDisksFiles.amd64]
SiBEAM_x64.sys = 1,,

[_CopyFiles_sys]
SiBEAM_x64.sys,,,0x00000004

[Strings]

;
; Non-Localizable Strings
;

REG_SZ         = 0x00000000
REG_MULTI_SZ   = 0x00010000
REG_EXPAND_SZ  = 0x00020000
REG_BINARY     = 0x00000001
REG_DWORD      = 0x00010001
SERVICEROOT    = "System\CurrentControlSet\Services"

;
; Localizable Strings
;
S_Provider="SIMG"
S_Mfg="SiliconImage,Inc"
S_DeviceDesc1="SIMG SB92xx Host Serial"
S_DiskName="SIMG SB92xx Host Serial Driver Disk"
S_DriverName="SiBEAM_x64"
S_ServiceName="SIMGSB92xxHostSerial"


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.99