# Sample variables file for BCM94330 SD FCBGA AGB McLaren board # TSSI parameters are preliminary set on 08/09/2010 # 5G parameter by Patrickz manfid=0x2d0 prodid=0x0532 vendid=0x14e4 devid=0x4360 boardtype=0x0532 boardrev=0x40 #boardflags: has ext 5GHz lna, use a SP3T sw share with BT, 2.4GHz iLNA and iPA boardflags=0x10080a00 nocrc=1 xtalfreq=37400 boardnum=22 macaddr=00:90:4c:c5:12:38 ag0=255 # aa2g=1 means by default only one antenna, MAIN RF. aa2g=1 aa5g=1 ccode=ALL # 2.4GHz PA parameters are preliminary pa0b0=5491 pa0b1=-641 pa0b2=-165 cckPwrOffset=4 # rssi params for 2.4GHz rssismf2g=0xa rssismc2g=0x3 rssisav2g=0x7 # rssi params for 5GHz rssismf5g=0xa rssismc5g=0x7 rssisav5g=0x1 #PA parameters for lower a-band pa1lob0=4651 pa1lob1=-506 pa1lob2=-62 #PA parameters for midband pa1b0=4609 pa1b1=-519 pa1b2=-73 #PA parameters for high band pa1hib0=4345 pa1hib1=-493 pa1hib2=-46 sromrev=3 # 2.4G Tx Power maxp2ga0=0x4a ofdm2gpo=0x66666666 mcs2gpo0=0x8888 mcs2gpo1=0x8888 # 5G Tx Power maxp5ga0=0x4a maxp5gla0=0x4a maxp5gha0=0x4a ofdm5gpo=0x44444444 ofdm5glpo=0x44444444 ofdm5ghpo=0x44444444 mcs5gpo0=0x6666 mcs5gpo1=0x6666 mcs5glpo0=0x6666 mcs5glpo1=0x6666 mcs5ghpo0=0x6666 mcs5ghpo1=0x6666 #il0macaddr=00:90:4c:c5:12:38 #wl0id=0x431b # support A band ext PA extpagain5g=2 rfreg033=0x1f pacalidx2g=65 dacrate2g=160 txalpfbyp2g=1 bphyscale=17 swctrlmap_2g=0x44844484,0x42824282,0x40804484,0x818282,0x1ff swctrlmap_5g=0x50905090,0x68a868a8,0x60a060a0,0x818282,0x2f8 tridx5g=0 triso5g=9 xtalmode=0x20,0x4,0 noise_cal_ref_2g=56 noise_cal_po_bias_2g=-4 pa0itssit=0x20 # muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG # muxenab=0x1 tssitime=1 txiqlopapu5g=1 txiqlopag5g=0x10 noise_cal_po_5g=5 iqlocalidx5g=64 txgaintbl5g=1 # Out-of-band GPIO wakeup sd_gpout=0 sd_gpval=1 sd_gpdc=0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.