Readme.txt Driver File Contents (CV3-X1_59XNJ_ZPE.exe)

Download

1. Click Download File and follow the remaining prompts to download the file.
2. When the File Download window appears, click Run to unzip the download package into your hard drive.
3. The file explorer will open pointing to the directory containing the download package. Please take note of the path.

------------------------------------------------------------------------------------------

Firmware upgrade through the Windows utility

ATTENTION
1. Backup the user data in Solid-State Drive.
2. Switch to AC Power.
3. Put targeted SSD which want to be flashed FW as secondary drive or as external storage device drive through the USB port.
4. New FW can only be actived after reboot or power reset.
5. This utility can face flash FW by the same FW version SSD, that is, it will face flash FW T8x410B again if the FW of target SSD is T8x410B already.
 
Procedure
1. Run the utility to start firmware update process.
2. On the first screen, if the target SSD is not listed, select it and then Click "Update".
3. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click OK to proceed.
4. FW upgrade will proceed. When the FW upgrade process completes, the user will be prompted to reboot the machine. Please close all open applications and save your work before rebooting your machine.
5. The system will reboot and load the FW. Once the FW update completes (screen will show firmware update done), you can boot into Windows.
6. To confirm the FW is updated successfully, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the FW version.

------------------------------------------------------------------------------------------

Firmware upgrade through the DOS utility

ATTENTION
1. Backup the Solid-State Drive.
2. Switch AC Power.
3. The DOS utility only supports Intel systems. 

Procedure
1. Go into the DOS sub-directory.
2. Insert a blank CD-R disc into your CD/DVD R/W drive.
3. Burn the ISO image into a CD-R media. 
4. Insert the CD-R (created from the above steps) into the CD-ROM/DVD drive in the target system.
5. Boot your system from the CD/DVD drive (for instructions, please refer to the manual that came with your system).
6. Please select the targeted drive once your system boots into DOS.
7. The next screen is a warning message. It states the risks and reminds user to backup important files before proceeding. Please click "Y" to proceed.
8. Firmware upgrade will proceed. When the firmware upgrade process completes, the user will be prompted to reboot the machine. Remove the CD-R from your CD/DVD drive, and reboot your system. It will boot into Windows.
9. To confirm the firmware update was successful, open Device manager -> open SSD -> click Properties -> choose hardware ID under Details and check the firmware version.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.06