Kpnmsg.ini Driver File Contents (NW-FAX_Win2K_XP.exe)

[MESSAGE]
TITLE="KPrint Error Message"
TITLE_NM="KPrint Port"
WINSOCK_ERROR="Check whether TCP/IP is set correctly in network properties."
SOCKVER_ERROR="%s does not run correctly using this version of WinSock."
LPR_RETRY="An error occurred during communication. Check whether power to the printer is on and the printing system is online. Clicking the Retry Button will restart printing."
LPR_RETRY_TOP="An error occurred during communication. Clicking the Retry Button will restart the print job from the beginning."
JCP95_ERROR="Using the print server is not supported."
LPR_QUEUE_ERR="An error occurred during communication. Check whether the port name of the print server is correct. Clicking the Retry Button will restart the print job."
IPP_RETRY="An error occurred during printing. The printing system power is off or the printer is off-line. Continue to print?"
IPP_SEND_ERR_CODE="An error occurred during communication. (ERROR CODE:%04X)\nPrinting will be canceled."
IPP_SEND_ERROR="An error occurred during communication.\nPrinting is canceled."
IPP_TIMEOUT="The print server does not respond. To continue, click the Retry Button."
IPP_NOT_AUTHORIZED="User authentication failed. Printing cannot start."
IPP_FORBIDDEN="The request was rejected. Printing is canceled."
ADD_PORT_LIMIT="Another KPrint wizard is already displayed."
PORTALREADYEXISTS_S="The printer port %s already exists."
NULL_PORT_ERROR="Enter the destination port."
ADD_PORT_ERROR="Addition of a KPrint port failed."
INVALIDSERVERNAME="IP address or a host name."
INVALIDQUEUENAME="Select the port name of the print server."
INVALIDPORTNAME_S="The IP address or host name is invalid."
INVALIDIPADDRESS="The IP address is invalid."
IPALREADYEXISTS="The IP address already exists."
ADD_BROADCASE_ERROR="IP address 255.255.255.255 is invalid."
BROADCAST_ERROR="The maximum number of Broadcast IPAddress is 16."
INVALID_URI="Enter a printing system URL."
INVALID_PROXYNAME="Enter an address for the proxy server."
INVALID_PROXYNUMBER="Enter the port number of the proxy server."
INVALID_CONNECT="Connection to the specified print server failed.\nContinue to add a KPrint Port?"
INVALID_URL_S="The URL is invalid."
CONF_PORT_LIMIT="Another port configuration dialog is already open."
INVALID_TIMEOUT="The timeout value should be set within the range of 60 to 3600."
INVALID_CHUNKSIZE="The size of Max chunk should be set within the range of 1024 to 16384."
INVALID_NUMBER="Enter the port number."
PROXY_ENABLE="Are you using a proxy server to connect to the Internet?"
PROXY_DISABLE="Print using the proxy server?\n\nIf a proxy server is used, ask your network administrator."
INVALID_USERNAME="The sender name is invalid."
INVALID_FROMADDR="The sender address is invalid."
INVALID_SERVNAME="The SMTP server name is invalid."
INVALIDSUBNETMASK="The subnet mask is invalid."
SEGALREADYEXISTS="The segment already exists.."
PING_SUCCESS="Communication with server %s was successful."
PING_FAILED="Server %s does not exist on the network."
INVALIDTOADDR="The transmission destination address is invalid."
INVALIDDIVIDESIZE="Split size must be 16 to 99999."
ADD_PORT_FINISH="The port for %s successfully created.\n\nThis port may be selected for printer drivers using the Windows Add Printer wizard."
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 0.80