Kpndlg.ini Driver File Contents (NW-FAX_Win2K_XP.exe)


ADDPORT="KPrint Add Port Wizard"
CONFIG="KPrint Port Configuration"
ADVANCED="Advanced Setup"
SEARCH="Printing System Search"
BROADCAST="Search Configuration"
ERROR="KPrint Error Message"
SEGMENT="IP Network Discovery Segment List"
COVERPAGE="Cover Page"

STC_PT_INFO="Select the network printing method.\n\nIf printing on a local area network, select RAW, LPR, IPP, or e-mail. If printing over the Internet, select IPP or e-mail."
STC_PN_INFO="Enter the desired port name. This name will be displayed in the Windows list of printer ports. Existing port names, such as LPT1, may not be used."
STC_LA_INFO="Enter the IP address or host name of the print server."
STC_LA_IP="&IP address or Host name:"
STC_LQ_INFO="Enter the port name of the print server."
STC_RA_PORT="&Port Number:"
IDC_IS_INFO="Select the method used by your PC to connect to the Internet."
STC_IU_INFO="Enter the URL of the IPP printer.\n(Example: ipp://"
STC_MW_INFO1="E-mail Printing Configuration"
STC_MW_INFO2="KPrint creates an e-mail port within Windows which directs print jobs to a remote printer's e-mail address. The KPrint e-mail port may be selected for existing or new printer drivers using the same procedure as any other printer port, such as LPT1."
STC_MW_INFO3="For e-mail printing to be successful, the printing system must be configured to retrieve the e-mailed print jobs from a POP3 mail server. POP3 configuration is done with AdminManager or with a browser."
STC_MW_INFO4="KPrint e-mail printing is only available for Kyocera/Kyocera Mita printing systems."
STC_FN_INFO="After clicking the [Finish] button, the KPrint port will be registered as below."
STC_FN_IP="IP address or host name:"
STC_FN_QUE="Port name of the Print Server:"
STC_FN_NAME="Destination printer port name:"
STC_FN_PORT="Port number:"
STC_FN_URL="Printing system URL:"
STC_FN_PRINTER="Destination printing system:"
STC_NAME="Destination &printer port name:"
STC_QUE="&Port name of the Print Server:"
STC_PORT="&Port number:"
STC_URL="Printing system &URL:"
STC_STATE="Communicating with the print server..."
STC_SC_INFO="Select the printing system from the list below and click [OK]. The printing system will be discovered only if it is on the local network segment. To discover an printing system on a remote network segment, click [Configure] and enter an IP network broadcast address and click [Search]."
STC_MB_INFO="Select the destination address from the following list."
STC_BC_INFO="Enter a broadcast address for the network to be searched, e.g.,"
STC_BASED="Port name based on:"
STC_ACCOUNT="Sender na&me:"
STC_FROMADR="S&ender address:"
STC_SMTP="SMTP ser&ver:"
STC_TOADR="Prin&ting system E-mail address:"
STC_EMAIL="&Port name:"
STC_USER="&User name:"
STC_TIME="Communication &timeout [60 to 3600 seconds]:"
STC_PW_INFO="To print, enter a user name and a password."
STC_TIMEOUT="&Timeout value:"
STC_CHUNK="&Max Chunk Size:"
STC_SG_INFO="Add the IP address of a remote network segment to the address list. All networks on the IP Network Discovery List will be searched in addition to the local network segment."
STC_IP="&IP Network Address"
STC_SUBNET="&Subnet Mask"
STC_SEGMENT="IP Network Discovery &List"
STC_CODE="C&haracter Code:"
STC_NOTE="Note: Address must be for an e-mail printing system, not a normal recipient."
STC_BIDI="Bi-directional communication is enabled in the configuration of the printer driver being used. Select [Disable bi-directional support for this Printing system] in Spool Settings of the properties of the printing system. Printing might fail when KPrint is used.\nContinue to print?"


ITEM0="IP address"
ITEM1="Host name"
ITEM2="MAC address"
ITEM3="Model name"
ITEM4="Printing System e-mail address"
ITEM5="IP network address"
ITEM6="Subnet mask"

LANG0="English (U.K.)"
LANG1="English (U.S.)"

BTN_NEXT="&Next >"
BTN_BACK="< &Back"
RAD_LPR="Print using &LPR (Line Printer Remote)."
RAD_IPP="Print using &IPP (Internet Printing Protocol)."
RAD_RAW="Print using &Raw mode."
RAD_SMTP="Print using &E-mail."
RAD_MODEM="Connects using a &modem and telephone line."
RAD_LAN="Connects using a &local area network."
RAD_OFF="N&o, a proxy server is not used."
RAD_ON="&Yes, a proxy server is used."
CHK_BIDI="Do not display the message from next t&ime."
CHK_POPUP="Display the print job &cover page dialog."
CHK_CHECK="Generate &return receipts."
CHK_AUTH="Use SMTP aut&hentication."
CHK_DIVIDE="&Split into multiple e-mails when larger than this size."
CHK_PROXY="Connect via p&roxy server."
CHK_CHUNK="Use &chunked encoding."
CHK_BASIC="U&ser authentication"
CHK_SAVE="&Set as the default configuration."

HELP0="For the sender name and sender address, enter the name and e-mail address of the person who will be sending print jobs. E-mail servers often reject e-mail that does not include a sender e-mail address. These are also used for return receipts and cover pages.\n\nTo send e-mail print jobs, the e-mail port must be able to establish a connection with an SMTP mail server. Enter the SMTP server name or IP address. Click the [Test] button if you want to verify connection to the SMTP server."
HELP1="Enter the e-mail address of the printing system that will receive the print jobs. Click the [Search] button to search the network for printing systems with the e-mail printing capability enabled.\n\nThe port name is displayed in the Windows port list.\n\nWhen [Display the print job cover page dialog] is enabled, the cover page configuration dialog is displayed for each print job. Selecting [Generate return receipts] will cause the printing system to send e-mail confirmation for every print job."
HELP2="If the mail server requires SMTP authentication, check [Use SMTP Authentication] and enter an authorized user name and password.\n\nSplitting into multiple e-mails may be necessary on some systems which limit the size of individual e-mails."
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.25