1. d-link_DE-660.zip Driver
2. PCNFS.TXT File Contents

PCNFS.TXT Driver File Contents (d-link_DE-660.zip)

==================================================================
NOTES ON
Installing D-Link DE-660 Ethernet PC Card
For SUN PC-NFS V5.0 Users
==================================================================
  (c) 1997-1998 Copyright D-Link Corporation  ALL RIGHTS RESERVED



This document contains DE660 PC Card installation notes, which is not
included in the DE-660 Ethernet PC Card USER'S GUIDE or onscreen
instructions, for SUN PC-NFS V5.0 users.


This document contains information on the following topics:

1.0   Overview
2.0   Installation Notes
	2.1  First installation from CD ROM
_______________________________________________________________



1.0   Overview
--------------

Please also refer to the INST_DOS.TXT file on the DE-660 Installation
disk.


2.0   Installation Notes
------------------------

	Note: If an NDIS driver is preferred please see
	      the \NDIS\PCNFS.TXT  file .
	      If a PACKET driver is preferred please refer
	      to the  \PKTDRV\PCNFS.TXT file.

	2.1  For ODI Driver Users
	-------------------------

	When using PC-NFS concurrently with NetWare, select the
	"ODI" option from the PC-NFS installation screen.  This option
	works with the ODI driver included in the provided driver
	diskette.
	Copy the files listed below into the \NFS directory of your
	hard disk. These files will be used in the installation.

	File	      Description
	-------------------------------------------------------
	NFSODI.SYS    PC-NFS driver program
	DE660.COM     ODI driver program
	LSL.COM       NetWare Link Support Layer
	IPXODI.COM    NetWare IPX/SPX Protocol
	NETX.EXE      NetWare Workstation Shell


	The following lists the contents of the configuration files:

	CONFIG.SYS			       AUTOEXEC.BAT
	----------------------- 	       -----------------------
	SWITCHES=/F			       SET TZ=EST5EDT
	DEVICE=C:\HIMEM.SYS		       C:\DOS\SMARTDRV.EXE
	DEVICE=C:\EMM386.EXE NOEMS X=D000-D7FF @PROMPT $p$g
	DOS=HIGH,UMB			       PATH=C:\NFS;C:\WINDOWS;
	BUFFERS=10,0			       SET TEMP=C:\DOS
	FILES=40			       SET NFSDRIVE=C
	STACKS=0,0			       SET NFSPATH=C:\NFS
	LASTDRIVE=G			       SET TN_DIR=C:\NFS\TELNET
	SHELL=C:\DOS\COMMAND.COM C:\DOS /P     LSL
	DEVICE=C:\NFS\PCNFS.SYS /l40	       DE660
	DEVICE=C:\NFS\SOCKDRV.SYS	       C:\NFS\PRT *
	DEVICE=C:\NFS\NFSODI.SYS /b2	       C:\NFS\NET INIT
					       IPXODI
					       NETX

	NET.CFG
	------------------------------------
	Link driver DE660
	       PORT 300
	       INT B
	       Frame Ethernet_802.3
	       Frame Ethernet_II
	       Protocol IPX 0 Ethernet_802.3

	If your Novell FILE SERVER is configured to use the
	Ethernet_802.3 frame type, add a /b2 switch to the line
	DEVICE=C:\NFS\NFSODI.SYS in your CONFIG.SYS file and add
	an entry in your NET.CFG file defining the two frames types.