==================================================================
NOTES ON
Installing D-Link DE-660 Ethernet PC Card
For Lantastic
==================================================================
(c) 1997-1998 Copyright D-Link Corporation ALL RIGHTS RESERVED
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Lantastic 5.0 Install
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Using NDIS driver
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
For NDIS driver support "DE660.DOS" driver for Ethernet
PC Card. User can use "DE660.DOS" driver to replace
AEXNDIS.DOS which is the NDIS driver offered by ARTISOFT.
*** CONFIG.SYS ****
DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
--------------------------------------------------------
DEVICE=C:\LANTASTI\AEXNDIS.DOS -------> By Lantastic
* please replace to *
DEVICE=C:\LANTASTI\DE660.DOS -------> By Vendor
--------------------------------------------------------
*** STARTNET.BAT ***
--------------------------------------------------------
C:\LANTASTI\AI-NDIS BIND_TO=AEXNDIS_NIF
* please replace to *
C:\LANTASTI\AI-NDIS BIND_TO=DE660_NIF
--------------------------------------------------------
C:\LANTASTI\AILANBIO
C:\LANTASTI\REDIR MachineName
*** PROTOCOL.INI ***
--------------------------------------------------------
[AEXNDIS_NIF]
DRIVERNAME = AEXNDIS$
* please replace to *
[DE660_NIF]
DRIVERNAME = DE660$
--------------------------------------------------------
Comments:
If you are using PROTMAN.DOS V1.x, you must use the
NO_BIND option on the AI-NDIS command line in the
STARTNET.BAT, and you must run NETBIND.EXE V1.x before
AILANBIO.EXE.
Lantastic 6.0 Install
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Using NDIS driver
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
To install NDIS driver "DE660.DOS", user can use Lantastic
6.0 install program, and select "NDIS support for network
adapters" then type path "C:\LANTASTI" (specify by install
program).
Install program will search "DE660.DOS" and "PROTOCOL.INI"
and copy these two files to target directory.
If user already installed Lantastic 6.0 and want to install
Ethernet PC Card, just replace AEXNDIS.DOS with NDIS
driver "DE660.DOS" at CONFIG.SYS
NOTE: "DE660.DOS" is an NDIS driver supported by Vendor.
"AEXNDIS.DOS" is an NDIS driver supported by ARTISOFT
*** CONFIG.SYS ***
DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
--------------------------------------------------------
DEVICE=C:\LANTASTI\AEXNDIS.DOS -------> By Lantastic
* please replace to *
DEVICE=C:\LANTASTI\DE660.DOS -------> By Vendor
--------------------------------------------------------
*** STARTNET.BAT ***
@echo ===== Begin Lantastic configuration =====
SET LAN_CFG=C:\LANTASTI
PATH C:\LANTASTI;%PATH%
SET LAN_DIR=C:\LANTASTI.NET
rem Please obtain the NETBEUI.EXE program from Microsoft
NETBEUI
--------------------------------------------------------
AI-NDIS BIND_TO=AEXNDIS_NIF
* please replace to *
AI-NDIS BIND_TO=DE660_NIF
--------------------------------------------------------
AILANBIO @STARTNET.CFG
REDIR LANTA @STARTNET.CFG
SERVER C:\LANTASTI.NET @STARTNET.CFG
NET LOGIN \\LANTA
@echo ===== End LANtastic configuration =====
*** Protocol.ini ***
[NETBEUI_XIF]
DriverName = netbeui$
Sessions = 6
NCBS = 12
--------------------------------------------------------
Bindings = AEXNDIS_NIF
* please replace to *
Bindings = DE660_NIF
--------------------------------------------------------
LANABASE = 1
--------------------------------------------------------
[AEXNDIS_NIF]
DRIVERNAME = AEXNDIS$
* please replace to *
[DE660_NIF]
DRIVERNAME = DE660$
--------------------------------------------------------
Using ODI DOS driver
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
ODI for DOS driver, support "DE660.COM" driver for Ethernet
PC Card. User can use "DE660.COM" driver to replace
NRODI.COM which is the ODI for DOS driver offered by ARTISOFT.
Note: Because DE660.COM following HSM v4.0 spec, please save
LSL.COM, IPXODI.COM that original supported by Lantastic.
Copy both LSL.COM, IPXODI.COM from release driver diskette
to target directory C:\LANTASTI.
*** STARTNET.BAT ***
@echo ===== Begin Lantastic configuration =====
SET LAN_CFG=C:\LANTASTI
PATH C:\LANTASTI;%PATH%
SET LAN_DIR=C:\LANTASTI.NET
SET NWDBPATH=C:\Lantasti\NW
LSL --> Please use new release driver
NRODI --> please replace to DE660
ODINSUP
IPXODI --> Please use new release driver
--------------------------------------------------------
AI-NDIS BIND_TO=NRODI
* please replace to *
AI-NDIS BIND_TO=DE660
--------------------------------------------------------
AILANBIO @STARTNET.CFG
REDIR LANTA @STARTNET.CFG
SERVER C:\LANTASTI.NET @STARTNET.CFG
NET LOGIN \\LANTA
@echo ===== End LANtastic configuration =====
*** NET.CFG ***
Please add below string into NET.CFG file.
Link Driver DE660
Frame Ethernet_802.3
Frame Ethernet_802.2
Frame Ethernet_II
Frame Ethernet_SNAP
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.