readme-efi.txt Driver File Contents (

Readme file for RocketRAID 272x_1x SAS Controller EFI Rom

Copyright (C) HighPoint Technologies, Inc. All rights reserved.
Last updated on Oct 21, 2016

Please review this file for important information about compatibility issues and
differences in operation that were discovered after our product manuals were
created. In case of conflict among various parts of the documentation set, this
file contains the most current information.

Note: The latest firmware and product documentation will be available for
download at

Files Listing
    readme-efi.txt    This file
    rr2710-efi64.rom  64-bit EFI Rom image for RR2720
    rr2711-efi64.rom  64-bit EFI Rom image for RR2711
    rr2720-efi64.rom  64-bit EFI Rom image for RR2720
    rr2721-efi64.rom  64-bit EFI Rom image for RR2721
    rr2722-efi64.rom  64-bit EFI Rom image for RR2722

Updating EFI Rom 

    The EFI Rom can be updated via Web RAID Management Interface.

    1) Login Web RAID Management Interface.

    2) From "Physical" tab, click "Browse" under Update Firmware to select the
EFI Rom image and then click "Submit" to update the EFI Rom.

    3) Reboot system.

Booting MacOS X from RR272x_1x adapter

Currently MacOS X can not be directly installed to arrays on RocketRAID adapter.
To boot the system from an array, you need to clone an installed system to the

You can follow these steps to make a bootable array on Mac Pro:

    1) Booting from an existing MacOS X system.

    2) Install RocketRAID adapter driver and web RAID management software.

    3) Setup an array in the web management interface.

    4) Run MacOS X Disk Utility and create a new volume on the array. The volume
       will be used as new boot volume.

    5) Clone the Mac OS X system volume to the new volume on HPT array. 
       A suggested clone utility is Carbon Copy Cloner:

    6) Open MacOS X System Preferences window and select "Startup Disk". Select
       the new volume as startup disk and click "Restart".

    7) MacOS X will boot from the array. You can remove the old system volume
       if it is no longer required.

Revision History
    v1.10.0 10/21/2016
       * Support block io interface.
    v1.0.13.608 06/08/2013
       * First release
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.00