1. 3030IPENUP2P.exe Driver
2. XCONN_IP.TXT File Contents

XCONN_IP.TXT Driver File Contents (3030IPENUP2P.exe)

========================================================================
       Extended System's ExtendNet Connect for TCP/IP
========================================================================
ExtendNet Connect for TCP/IP is a utility that allows simple, direct,
TCP/IP printing from your computer to a printer attached to an Extended
System's ExtendNet print server.  This utility requires that your print
servers be configured for TCP/IP.

To print using ExtendNet Connect you must do the following:

1. Install the ExtendNet Connect files by running the installation utility
    (SETUP.EXE).
2. Select Settings from Start and open the Printers folder.
3. Open the desired printer's Properties page.
4. Add an ExtendNet Connect Port.  This may be done through Add Port
   on the "Details" or "Ports" page.
5. Select Extended Systems ExtendNet Connect IP Monitor as the type of 
   port to add.
6. From the "Add ExtendNet Connect Port" dialog select the ExtendNet 
   print server port to which your printer is connected.

Note:
   Extend Connect works best when the ports on the Extended Systems 
   print server have been configured to have a descriptive name of
   the printer attached.  If you add an ExtendNet Connect port to your
   printer environment and later change the name of the Extended Sytems
   print server port that it maps to, you will no longer be able to 
   print to that port.