1. 3030IPENUP2P.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (3030IPENUP2P.exe)

============================================================
      Extended System's ExtendNet Connect for DLC
============================================================
ExtendNet Connect for DLC is a utility that allows simple,
direct, DLC printing from your computer to a printer 
attached to an Extended System's ExtendNet print server.  
This utility requires that your print servers be configured 
for the Lan Manager/Lan Server protocol.

Note: To install ExtendNet Connect for DLC you must first 
install the DLC protocol and it's latest update.  See the 
DLC installation steps outlined below. You will need your
Windows diskette(s) to complete the protocol installation.


Extended System's ExtendNet Connect installation procedure:

1. Install the DLC Protocol and it's updated files as 
   follows:
   a. Create a temporary folder on your hard disk.
   b. From the "DLC" subdirectory on the"Windows Network 
      Printing Utilities" diskette copy "msdlc32.exe" and
      "dlc32upd.exe" to the temporary folder.
   c. In that folder, double-click  "msdlc32.exe" to 
      extract the files.
   d. Open the Windows "Control Panel".
   e. Select the "Network" icon, the "Network" dialog will 
      appear.
   f. From the "Configuration" tab, select the "Add" button,
      the "Select Network Component Type" dialog will 
      appear.
   g. Select "Protocol" as the type and then select the 
      "Add" Button, the "Select Network Protocol" dialog 
      will appear.
   h. Select the "Have Disk" button.  The "Install from 
      Disk" dialog will appear. Enter the path of the 
      temporary folder in which you copied and extracted 
      the "msdlc.exe" file.
   i. Select the "OK" button. The "Select Network Protocol" 
      dialog will appear.
   j. Select "Microsoft 32-bit DLC" and then select the 
      "OK" button.
   k. The DLC files will be copied and the DLC protocol
      added to Windows.
   l. Select the "OK" button on the "Network" dialog. 
      Windows will now attempt to reload all protocols.  
      You will need to insert your Windows diskette as 
      prompted.
   m. Respond to the "Do you want to restart your computer
      now?" prompt with "Yes".
   n. From the temporary folder created above, double-click
      "dlc32upd.exe" to update the DLC files.  A dialog will
      appear prompting you to continue with the file update.
      Select "Yes" to continue.
   o. The files will be updated and a final window will 
      appear stating the successful completion of the
      update. Select "OK".
   p. Now, you must reboot your PC and the DLC protocol will
      be completely installed.

2. Install the Extended System's ExtendNet Connect for DLC 
   files using "setup.exe" on the "Windows Network Printing 
   Utilities" diskette.

3. To print using ExtendNet Connect you must do the 
   following:
   a. Select "Settings" from the "Start" menu and open the 
      "Printers" folder.
   b. Open the desired printer's "Properties" page by right-
      clicking on the printer.
   c. From the "Properties" page, select the "Details" or
      "Ports" tab.  Select the "Add Port" button.
   d. From the "Add Port" dialog, select the "Other" radio
      button and then select "Extended Systems ExtendNet 
      Connect DLC Monitor" as the type of port to add.
   e. From the "Add ExtendNet Connect Port" dialog select 
      the ExtendNet print server port to which your printer
      is connected.
   f. You are now ready to print!