************************************************************************
SOFTWARE LICENSE AGREEMENT
YOU, THE END USER, SHALL USE THIS SOFTWARE("THE SOFTWARE") ACCORDING TO THE
TERMS OF THIS AGREEMENT.
BY LOADING THE SOFTWARE INTO ANY COMPUTER, YOU ARE AGREEING TO BE BOUND BY
THESE TERMS. IF YOU DO NOT ACCEPT THE TERMS OF THIS AGREEMENT, YOU MAY NOT
LOAD THIS SOFTWARE INTO ANY COMPUTER.
Grant of License
The Software is licensed for use by you for the equipment packaged with the Software or
designated by its supplier ("the equipment"). You are permitted to use the Software on any
computer which permits electronic access to the equipment. You are not permitted to rent or
lease the Software or to transfer your rights under this license to a third party.
Acceptance
You shall be deemed to have accepted the terms of this Agreement by loading the Software into
any computer.
Duration
This license is effective until terminated. The license will terminate where you fail to comply with the
terms of this Agreement. Upon termination, you agree to destroy all copies of the Software and its
documentation.
Ownership of Software
You own, if any, only the magnetic media on which the Software has been delivered. It is an express
condition of this Agreement that the title and ownership of the Software shall be retained by its owners.
Copying
The Software and its documentation are the subject of Copyright.
You may not make any copies nor cause others to make copies of the Software except such copies as
are necessary for licensed use and one copy for operational security. Any such copies are subject to
the conditions of this Agreement.
You may not modify, adapt, merge, translate, reverse engineer, decompile, disassemble or create
derivative works based on the whole or any part of the Software or its associated documentation.
You may be held legally responsible for any copyright infringement, unauthorized transfer, reproduction
or use of the Software or its documentation.
Limitation of Warranty
The media, if any, not the Software contained therein, is warranted to the original purchaser against
defects in material and workmanship for a period of one year from the date of original purchase.
Defective media will be replaced when it is returned to your supplier, postage prepaid, along with a
copy of the purchase receipt.
THESE RIGHTS ARE YOUR SOLE AND EXCLUSIVE REMEDY, WHETHER IN TORT, CONTRACT, OR
OTHERWISE. IN NO EVENT SHALL SUPPLIER, OWNER OF THE SOFTWARE OR ITS LICENSORS BE
LIABLE FOR DAMAGES (INCLUDING ANY FOR LOSS OF INFORMATION, PROFITS, SAVINGS OR
BUSINESS INTERRUPTION OR OTHER DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES) ARISING OUT OF THE SOFTWARE OR THE USE THEREOF, OR THE INABILITY
TO USE THE SOFTWARE.
Exporting Law
You acknowledge that the export of the Software is governed by the export control laws of the United
States and other countries. You agree to comply with all such export control laws.
Governing Law and Jurisdiction
If any provision or portion of this Agreement shall be found to be illegal, invalid or unenforceable, the
remaining provisions shall remain in full force and effect. This Agreement shall be governed by the
laws of California, USA and is subject to the jurisdiction of the Federal District courts for the Central
District of California by a judge and not a jury.
************************************************************************
=================================================================================
Printer Driver
For Microsoft Windows 2000/Windows XP/Windows Server2003/Windows Server2003 R2/
Windows Vista/Windows Server2008/Windows Server2008 R2/Windows 7 (x86/x64)
[Drv Ver] 1.0.1.60
=================================================================================
Introduction
This file describes how to set up your printer driver and contains the most up-to-date information that
was available at the time of software release. For information on Printer Driver settings and features,
please check the Help file.
<Contents>
1) Supported operating systems:
2) Getting started
2-1) Installing the printer driver
2-2) Upgrading the printer driver
2-3) Uninstalling the printer driver
3) Other important points
========================================================================
1) Supported operating systems:
[OS environment]
<32bit(x86)>
Windows 2000 Professional/Server/Advanced Server
Windows XP Professional/Home Edition
Windows Server 2003 Standard Edition/Enterprise Edition
Windows Server 2003 R2 Standard Edition/Enterprise Edition
Windows Vista Home Basic/Home Premium/Ultimate/Enterprise/Business
Windows Server 2008 Standard Edition/Standard Edition without Hyper-V/Enterprise Edition/Enterprise
Edition without Hyper-V
Windows 7 Home Premium/Professional/Enterprise/Ultimate
<64bit(x64)>
Windows XP Professional x64 Edition
Windows Server 2003 Standard Edition/Enterprise Edition
Windows Server 2003 R2 Standard Edition/Enterprise Edition
Windows Vista Home Basic/Home Premium/Ultimate/Enterprise/Business
Windows Server 2008 Standard Edition/Standard Edition without Hyper-V/Enterprise Edition/Enterprise
Edition without Hyper-V
Windows Server 2008 R2 Standard Edition/Enterprise Edition
Windows 7 Home Premium/Professional/Enterprise/Ultimate
[PC environment]
PC that operates above-mentioned [OS environment].
2) Getting started
2-1) Installing the printer driver
2-1-1 Windows 7/Vista/Server 2008 R2
Be sure to close all applications before installing the driver.
Note: This procedure requires administrator privileges (admin account or "Run as Administrator").
2-1-1-a Standard installation
Step 1 From the "Start" menu, select "Devices and Printers" > "Add a Printer".
Step 2 The "Add a Printer" dialogue will be displayed asking "What type of printer do you want to
install?" Select "Add network, wireless, or Bluetooth printer".
Step 3 The "Searching for available printers" dialogue appears. Select the gDEVICEh from the list
of printers and click "Next". (If you do not see your gDEVICEh in this list, please proceed to
"What to do if your device is not found" at the end of this section.)
Step 4 The "Install the printer driver" dialogue appears. Click "Have Disk".
Step 5 Browse to the folder containing the driver files (typically the CD-ROM or an extracted archive
downloaded from the website) and click "OK".
Step 6 Follow the rest of the Wizard's instructions to complete the installation.
2-1-1-b What to do if your device is not found
Step 1 From the "Start" menu, select "Devices and Printers" > "Add a Printer".
Step 2 The "Add a Printer" dialogue will be displayed asking "What type of printer do you want to
install?" Select "Add a local printer".
Step 3 The "Choose a printer port" dialogue will be displayed. Create a new "Standard TCP/IP Port"
and click "Next".
Step 4 Enter the "DEVICE" IP address and uncheck "Query the printer and automatically select the
driver to use". Click "Next".
Step 5 The "Install the printer driver" dialogue appears. Click "Have Disk".
Step 6 Browse to the folder containing the driver files (typically the CD-ROM or an extracted archive
downloaded from the website) and click "OK".
Step 7 Follow the rest of the Wizard's instructions to complete the installation.
2-1-2 Windows XP and 2K
Be sure to close all applications before installing the driver.
Note: This procedure requires administrator privileges
Step 1 Open gPrinters and Faxes from the Start menu.
Step 2 Select gAdd Printerh.
Step 3 gWelcome to the Add Printer Wizardh is displayed. Click gNext >h.
Step 4 The gLocal or Network Printerh dialogue is displayed. Select gLocal printer attached to this
computerh and click gNext >h. Note: Do not enable gAutomatically detect and install my Plug
and Play printerh.
Step 5 The gSelect a Printer Porth dialogue is displayed. Select gCreate a new porth > gStandard
TCP/IP Porth as the port type and click gNext >h.
Step 6 The gAdd Standard TCP/IP Printer Port Wizardh is displayed. Click gNext >h.
Step 7 Enter the device IP address or hostname and click gNext >h.
Step 8 The gInstall Printer Softwareh dialogue is displayed. Select gHave Disk ch.
Step 9 Browse to the folder containing the driver files (typically the CD-ROM or an extracted archive
downloaded from the website) and click "OK".
Step 10 Follow the rest of the Wizard's instructions to complete the installation.
2-2) Upgrading the driver
2-2-1 Windows 7/Vista/Server 2008 R2
Be sure to close all applications before upgrading the driver.
Note: This procedure requires administrator privileges (admin account or "Run as Administrator").
Step 1) Open the "Printers" folder (or "Printers and Faxes") from the "Start" menu or "Control Panel".
Step 2) Open the Properties of the printer to be upgraded.
Step 3) Advanced tab > New Driver button > Next button.
Step 4) Select "Have Disk..." then browse to the folder containing the extracted printer driver INF
file. Click Open.
Step 5) Click OK and select the printer model. Click Next.
Step 6) Once the installation is complete, click Finish.
Step 7) Click OK to close the Printer Properties dialog box.
2-3) Uninstalling the printer driver
2-3-1 Windows 7/Vista/Server 2008 R2
Be sure to close all applications before uninstalling the driver.
Note: This procedure requires administrator privileges (admin account or "Run as Administrator").
Step 1) Control Panel > Printers
Step 2) Locate the logical printer corresponding to the driver that is to be uninstalled and delete it.
Step 3) Delete the driver from Server Properties > Driver tab.
Step 4) Log the current user account off.
2-3-2 Windows XP and 2K
Be sure to close all applications before uninstalling the driver.
Note: This procedure requires administrator privileges
Step 1) Open the "Printers" folder (or "Printers and Faxes") from the "Start" menu or "Control Panel".
Step 2) Delete the logical printer corresponding to the driver that is to be uninstalled.
Step 3) File > Server Properties > Driver tab.
Step 4) Select the driver to be uninstalled.
Step 5) Press the Delete key.
Step 6) Log the current user account off.
3) Other important points
-1 During the printer driver installation, Windows may alert that Windows
can't verify the publisher of this driver. However, the printer driver
functionality is not affected. Please continue the installation.
* Limitation/Notes in using PS printer driver
[Windows functions]
* If virtual memory on a Windows operating system is set lower than usual,
insufficient memory errors will occur and drawing operations in
applications or printer drivers will not perform properly.
Documents might not print correctly or the following problems might occur:
- Low memory warnings.
- Application errors.
- Printing discontinues without warning.
Increase the memory setting for virtual memory, and then start printing.
if this is not helpful, add additional memory to the computer.
* If a Separator Page is selected, some documents may not print as expected.
* Please do not change the "Driver" settings on "Advanced" tab.
* When you set up an IPP Printer, please set
"http://<Printer's IP Address>/ipp/port1" as Printer URL.
========================================================================
All brand names and product names mentioned in this document are trademarks or registered
trademarks of their respective companies.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.