Setupconfig.ini Driver File Contents (XPS-8700_Network_Driver_33H8G_WN32_10.0.0.318_A00.EXE)

; Atheros Communications Inc.
; This is a sample file used for configuration of Bluetooth device parameters
; Usage of this file is optional. It is not required for standard behavior of Atheros BT software.
; This file should be copied to the same directory as the installer software prior to installation.
;
; All lines that begin with a semicolon are ignored.
;
; Vendor specific PID and VID should be set with PID and VID fields in [PVID] section.
; Values of PID and VID are programmed into the firmware for the BT device.
; The device will identify itself with these values in the Device Manager.
[PVID]
PID=0036
vid=0CF3

[Side_Switch_Config]
;#### PIN_index ####
;#### the range of value (8~30 or 32~37) ####
PIN_index=36

;#### Enable ####
;#### 1 or 0 ####
Enable=1

;#### High_Enable ####
;#### 1 or 0 ####
High_Enable=1

[Led_Config]
;#### PIN_index ####
;#### the range of value (8~30 or 31~37) ####
PIN_Index=23

;#### Blinking_Enable ####
;#### 1 or 0 ####
Blinking_Enable=0


;#### High_Enable ####
;#### 1 or 0 ####
High_Enable=0

;#### Suspend_off_Enable ####
;#### 1 or 0 ####
Suspend_off_Enable=0


;#### Separate_LED_Enable ####
;#### 1 or 0 ####
Separate_LED=1

[Suspend_CONfig]

;#### Enable ####
;#### 1 or 0 ####
Enable=0

[HidePBAP]
value=0

[BT_Profile]
VDP=0
HDP=0

[BTAGENT]
Enable=0

[SysCfg_GPIO_Configuration]
;###Side_Switch###
SideSwitch_GPIO_Index=73
SideSwitch_Enable=1
SideSwitch_High_Enable=1
;###LED###
Led_GPIO_Index=72
Led_Blinking_Enable=0
Led_Suspend_Off_Enable=0
Led_High_Enable=0
Led_Seperate_Pin=0

[Aphrodite_SysCfg_GPIO_Configuration]
;###Side_Switch###
SideSwitch_GPIO_Index=73
SideSwitch_Enable=1
SideSwitch_High_Enable=1
;###LED###
Led_GPIO_Index=72
Led_Blinking_Enable=0
Led_Suspend_Off_Enable=0
Led_High_Enable=0
Led_Seperate_Pin=0

[AddRegKeys] 
HKEY_LOCAL_MACHINE,SOFTWARE\ATHEROS\VistaAddOn,DelayForUSBD,50,REG_DWORD
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.43