; Protocol.ini section for the Broadcom Ethernet NDIS2 [B57] DriverName = "B57$" ; BusNum from 0 to 255 ; BusNum = ; DevNum from 0 to 31 ; DevNum = ; PortNum or FuncNum from 0 to 7 ; PortNum = ; FuncNum = ; LinSpeed can be set to 10 or 100 ; LineSpeed = ; Duplex can be set to half or full. LineSpeed is required when this keyword is used. ; Duplex = ; NodeAddress specifies the network address used. ; NodeAddress = ; FixCheckSumOff turns off the driver's work-around for the TCP/IP stack to recognize ; the 1's complimented version of the checksum. ; FixCheckSumOff ;AcceptAllMC informs the driver to deliver ALL Multicast packets to the upper Protocol. ;AcceptAllMC ; ; To add more adapter(up to 4) repeat the below entry, where n can be from 2 to 4. ; ;[B57_n] ; DriverName = "B57n$" ; BusNum = ; DevNum = ; PortNum = ; FuncNum = ; LineSpeed = ; Duplex = ; NodeAddress = ; FixCheckSumOff ; AcceptAllMCDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.