Broadcom (R) Corporation
Broadcom USH CD
for the BCM5880/BCM5882 USH product
RELEASE 2.2.00029.22.7.027.0A
(06/22/2011)
RELEASE NOTES
These notes describe release software for the BCM5880 USH Product
For release version information for individual products, see the
"Release Version Information Table" below.
Software Compatibility
======================
This release of software supports:
- BCM5880 USH with A0/B0/C0 step silicon version.
- BCM5882 USH with A0 step silicon version.
Upgrading from the Previous Driver Release
==========================================
It is highly recommended that you upgrade any previous installations
of the Broadcom BCM5880/BCM5882 USH software.
If you are installing on a platform that is currently running DCP version 1.3
or earlier (with USH firmware 1.3 or earlier), the upgrade to DCP version 2.0
(and USH firmware 2.0) MUST occur in the following order:
1) Upgrade firmware to 2.0
2) Upgrade USH host components to 2.0
Contents of the CD
==================
*** Release Version Information Table ***
Product Version Previous Rel.
1. USH Firmware 22.7.027.0 22.7.026.0
2. MA Bios-Driver 4.0.4 4.0.3
3. MP Bios-Driver 4.0.4 4.0.3
4. WinXp Drivers and Applications 4.1.3 4.1.2
5. USH DOS Diagnostics 2.17 2.15
6. CV host software 0.24G 0.24E
7. CV host software 64 bit 0.24G 0.24E
8. CV Firmware 1.0.2.51 1.0.2.47
9. Installer for host components that 2.2.029 2.2.028
includes USH host components
10. Dell Data Protection | Prerequisites X08 X03
11. Dell Data Protection | Driver X16 X08
12. Dell Data Protection | Middleware X10 X03
13. Dell Data Protection | Application X12 X01
This release contains the following software programs:
1) BCM5880 USH Firmware. Supports TPM 1.2 and PCSC. For more
deatils, please refer to the release notes under firmware/
2) USH MA Bios-Driver. Supports TPM 1.2 for TPM bios access. For more
details, please refer release notes under bios-driver/madriver
3) USH MP Bios-Driver. Supports TPM 1.2 for TPM bios access. For more
details, please refer release notes under bios-driver/mpdriver
4) USH Windows XP TPM drivers and tpm applications which includes
TPM Diagnostics and Firmware upgrade tool. For more details,
please refer release notes under windowsxp/
5) CV host sofware that includes CV USB host driver, CV API user library,
User DLL, and applications. For more details refer to release notes
under windowsxp and windowsxp/cv
6) CV host software for XP 64 bit platform. Includes CV USB host driver,
CV API user library, User DLL and applications.
7) Installer for host components. This includes CV, TPM and UCC components.
Changes/Additions
=================
In Release 2.2.00029.22.7.027.0A
================================
- Firmware 22.7.027.0:
- Added ID7 images
In Release 2.2.00029.22.7.027.0
================================
- Firmware 22.7.027.0:
- Post review cleanup
In Release 2.2.00029.22.7.026.0
================================
- Firmware 22.7.026.0:
- ESPSW-2044: [DDPA_wbf] PBA screen will bring up to dell secure manager page when press once any key to continue
- Host Components:
- ESPSW-2042: Wave GINA is stuck at "initializing fingerprint sensor" when resumes from s3
- ESPSW-2047: Window GINA shows "failure" instead of "please swipe finger" when resumed from s3
In Release 2.2.00028.22.7.024.0
================================
- Firmware 22.7.024.0:
- ESPSW-2039: Issue with provisioning a counter using TPM CreateCounter command
- Improve async FP detection performance for swipe sensors
In Release 2.2.00028.22.7.023.0
================================
- Firmware 22.7.023.0:
- ESPSW-2005/DF483779: 'no response' for FP with Validity sensor
- ESPSW-2039: Issue with provisioning a counter using TPM CreateCounter command
- Updated to Validity lib 4.2.406 gold release. Fixes EP3 Cancel problems
In Release 2.2.00028.22.7.022.0
================================
- Host Components:
- added WHQL signatures
In Release 2.2.00027.22.7.022.0
================================
- Firmware 22.7.022.0:
- ESPSW-2033 [DDPA] Memory leak on Reebok (5880)
- Host Components:
- ESPSW-2034 [DDPA_wbf] DellAccesshas stopped working when use security wizard enrolling fingerprint
In Release 2.2.00026.22.7.021.0
================================
- USH WBF Tool V1.0.0.7:
- ESPSW-2023 FW crashed with 0X17 error after enable and diable WBF for 14 times
In Release 2.2.00025.22.7.021.0
================================
- Firmware 22.7.021.0:
- ESPSW-2028 FW will reset to SBI mode with UPEK system
- ESPSW-2029 [DDPA/WBF] Cannot into PWR mode 3 when CSC and FP users enrolled and Pass PBA with CSC user
- Host Components:
- ESPSW-2031 [WBF] FMA fails to cancel enrollment properly
In Release 2.2.00024.22.7.020.0
================================
- Host Components
- added file logging for wbdi driver
In Release 2.2.00023.22.7.020.0
================================
- Firmware:
- Updated to Validity library version 4.02.405
- ESPSW-2001/ESPSW-1987: [DDPA/WBF] FW will reset to SBI mode
- ESPSW-2003: [DDPA/WBF] "Fingerprint reader not detected" error returns with Gemalto NET Bio SC
Note: only ‘case 2’ is fixed (case 1 is still under investigation).
- ESPSW-2021: [DDPA/WBF] Include wrong config file of Brooks 15"/17" system. (It will get 0x5e when run Ind test)
- Defer re-enabling of h/w finger detect following FP reset until FP device reinitialized
- ESPSW-2024: Issue reported during health check with 2.2 fw and 2.1 HCI+2.1 DDP|A
- Host Components
- ESPSW-1973: WLK1.6 Fingerprint Reader Logo - Fail to run engine adapter tests
- ESPSW-1975: WLK1.6 Fingerprint Reader Logo - Fail to run WBDI driver tests
- ESPSW-1976: [WBF] Failure of Microsoft WBDIdrivertest suite when use validity sensor
- ESPSW-2018: [DDPA_wbf] the systen show shutdown notice then shutdown after resume from S3 using FP login gina on XP64 .
- ESPSW-2021: [DDPA/WBF] Include wrong config file of Brooks 15"/17" system. (It will get 0x5e when run Ind test)
In Release 2.2.00022.22.7.019.0
================================
- Host Components
- ESPSW-1973: WLK1.6 Fingerprint Reader Logo - Fail to run engine adapter tests
In Release 2.2.00021.22.7.019.0
================================
- Firmware 22.7.019.0
- ESPSW-2015/DF477605: [E3 OBE]E3 OBE daily found validity FP can't enroll intermittently
- Host Components
- ESPSW-1967: [DDPA_wbf] Fingerprint failure to login PBA and GINA , when system resume from S3/S4 with Validity sensor .
- ESPSW-1982: FP no response after multiple times enrolled with Gemalto NET Bio SC
- ESPSW-1985: Run USHdiag CV command: CV FP Duplicate Check in 64 bit OS will return 0x200008 error
- ESPSW-1987: [DDPA/WBF] FW crash after resume from S3/S4 when using Gemalto NET Bio SC with Validaty sensor
- ESPSW-1993: [WBF] wbf drivers identify touch sensor as swipe sensor
- ESPSW-1999: [DDPA_wbf] The system automatically shut down when fail to enroll second or third finger on XP32 64 system
- ESPSW-2001: [DDPA/WBF] FW will reset to SBI mode
- ESPSW-2004/DF475573: X17 DDPA Drivers Changes CV in Device Manager
- ESPSW-2005: 'no response' for FP with Validity sensor
- ESPSW-2012: Fields tag, contextCount and resourceType in TPM_CONTEXT_BLOB have incorrect byte order in output of TPM_SaveContext
In Release 2.2.00020.22.7.018.0
================================
- Host Components
- ESPSW-2002: CVHCI installer failed with error code 2753 "The file ushwbf.exe is not marked for installation"
In Release 2.2.00019.22.7.018.0
================================
- Firmware 22.7.018.0
- ESPSW-1979: When it's a bad swipe, the system would hang unless you manually cancel the FP prompt(force to get 0x0000002f)
- ESPSW-1991: With a VFS5111 sensor, when a bad FP swipe occurs, either the system would hang unless you manually cancel the
prompt or the FP capture would be terminated after re-swipe without the expected FP prompt appearing...
- ESPSW-1980: [DDPA/WBF] Fail to run USHdiag-FP test when using Gemalto NET Bio SC with Validaty sensor
- ESPSW-1981: Disable SmartCard with ushdiag and SC test in CV Diag Grp Test or CV Diag Ind Test still returns Passed
- ESPSW-1802: DF406086 , DDPA 2.0- Fingerprint enrollment allows the same finger to be enrolled twice
(Note: existing templates must be deleted and fingerprints reenrolled for the duplicate fingerprint logic to function.)
- Host Components
- ESPSW-1984: WBDI enpoint is not enabled after installing CVHCI
- ESPSW-1974: Modified StorageAdapterAddRecord() to return E_NOTIMPL.
- ESPSW-1992: Please confirm if the api/CSS_FingerprintUpdateEnrollment() is supported with a 5880 board.
- ESPSW-1994: with a 5880 board, calling CSS_FingerprintCaptureGetResult() with the persisted raw FP image flag on would return the error/0x89,
but it is fine with the persisted feature set flag on.
- ESPSW-1995: [DDPAwbf] Fail to using the Gemalto .Net BIO SC on USH 5880
- ESPSW-1996: Calling CSS_FingerprintCommitEnrollment again with the correct steps/inputs would always fail with the error/0x0000008C or 0x00000059
after calling it with invalid attribute list or auth list successfully meaning getting the expected returns
In Release 2.2.00018.22.7.017.0
================================
- Firmware 22.7.017.0
- ESPSW-1980: [DDPA/WBF] Fail to run USHdiag-FP test when using Gemalto NET Bio SC with Validaty sensor
- ESPSW-1959: CSC no responding at PBA authentication when enable CV only radio Per: then restart system
- Re-introduced WBDI endpoint enable/disable; disabled by default
- cancel any outstanding FP capture when WBDI interface disabled
- Host Components
- Re-introduced WBDI endpoint enable/disable
- Automatically enable WBDI endpoint during HCI install (only if supported by FW); disable it during uninstall
- several fixes related to hibernate/standby
- for 5880, fix failure occurring if subsequent template size smaller than one from previous enrollment
- for 5880, decrease FP poll time in order to reduce FP cancellation latency
- USH WBF tool V1.0.0.6:
- Removed "Press Enter to Exit" when command line finished.
- USH Radiomode v1.3.0.3:
- Now account for volatile and non volatile radio mode.
- FMA
- ESPSW-1977: [WBF] FMA always shows image of left hand during capture
In Release 2.2.00017.22.7.016.0
================================
- Host Components
- ESPSW-1957: [WBF 2.2]CSS_FingerprintRegisterEvent should return an error when registering unsupported event, other than CV_FP_EVENT_FP_AVAIL/CV_FP_EVENT_CANCEL_OR_FAIL
- Sensor adapter operational in Basic mode
- Ignore Global configuration for WBF Advanced and Basic mode.
- FMA
- ESPSW-1968: [DDPA/WBF] FMA should not allow to enroll fingerprints for built-in Administrator or Guest accounts
- WPE Tools
- ESPSW-1969: [DDPA/WBF]Winpediag , Winpeushupgrade Failed to Execute
In Release 2.2.00016.22.7.014.0
================================
- Firmware:
- DF406086/ESPSW-1802: Fingerprint enrollment allows the same finger to be enrolled twice
- fix USH crash due to USB host driver bug associated with FP USB transfer cancellatio
- Host Components
- DF406086/ESPSW-1802: Fingerprint enrollment allows the same finger to be enrolled twice
- Windows USH Diag V1.1.0.20
- Added CV FP Duplicate Check command to control fingerprint duplicate check mechanism
In Release 2.2.00015.22.7.013.0
================================
- Firmware:
- ESPSW-1960 [DDPA/WBF] Fail to detect the smartcard reader in WAVE 2.1Beta1
- ESPSW-1962 [DDPA/WBF] Cannot enroll Contactless smart card user
- ESPSW-1963 [DDPA/WBF] Incorrect SC/CLSC reader name report from Demo4
- FMA
- ESPSW-1965 [ DDPA/WBF] FMA authentication process does not differentiate enrolled users
In Release 2.2.00014.22.7.012.0
================================
- official alpha release
- added BCM5880 support
In Release 2.2.00013.22.7.011.0
================================
- Host Components Installers:
- Removed USHWBF Tool
- Fixed install path of FMA
- Fixed driver install of ushwbf and ushwbdi
- WBF Drivers
- Biometric device is unavailable
- FMA
- Fixed uses only the first finger enrolled for authentication and for further enrollment
- reflect number of swipes needed by sensor in UI
In Release 2.2.00011.22.7.011.0
================================
- Fixed fw build procedure.
- Fixed WBF Adapter
In Release 2.2.00004.22.7.005.0
================================
- Preliminary pre-alpha QA release
Known Issues
============
- WBF and DDP|A can not co-exist.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.