1. ata_RAID_1200A.zip Driver
2. ata1200a.inf File Contents

ata1200a.inf Driver File Contents (ata_RAID_1200A.zip)

; 
; ata1200a.INF
; 
; INF file of Adaptec ATA RAID 1200A controller for Windows 2000
; Copyright (c) 2001 HighPoint Technologies, Inc. All rights reserved
;
[Version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%ADAPTEC%
CatalogFile= ata1200a.CAT
DriverVer=09/18/2002, 1.3


[DestinationDirs]
DefaultDestDir  = 12 ; DIRID_DRIVERS

[ControlFlags]
;
; Exclude the following devices from Select Device list.
; These represent 'combination' driver nodes, for which there are separate items to be
; presented to the user.  These combination nodes are only used when figuring out what
; driver node to associate with a pre-existing service.
;
ExcludeFromSelect = SCSI\ProcessorADAPTEC_RCM_DEVICE______
;ExcludeFromSelect = *

[Manufacturer]
%ADAPTEC%=Adaptec

[Adaptec]
%PCI\VEN_1103&DEV_0004&REV_03.DeviceDesc%=ata1200aPCI,PCI\VEN_1103&DEV_0004&REV_03
%PCI\VEN_1103&DEV_0004&REV_04.DeviceDesc%=ata1200aPCI,PCI\VEN_1103&DEV_0004&REV_04
%SCSI\ProcessorADAPTEC_RCM_DEVICE______.DeviceDesc% = NODRV, SCSI\ProcessorADAPTEC_RCM_DEVICE______

[NODRV]
AddReg=NODRV_AddReg
;

[NODRV.Services]
AddService = , %SPSVCINST_ASSOCSERVICE%   ; null service install

[ata1200aPCI.NT]
CopyFiles=@ata1200a.sys

[ata1200aPCI.NT.Services]
AddService = ata1200a, %SPSVCINST_ASSOCSERVICE%, ata1200aPCI_Service_Inst, Miniport_EventLog_Inst

[ata1200aPCI_Service_Inst]
ServiceType    = %SERVICE_KERNEL_DRIVER%
StartType      = %SERVICE_BOOT_START%
ErrorControl   = %SERVICE_ERROR_NORMAL%
ServiceBinary  = %12%\ata1200a.sys
LoadOrderGroup = SCSI Miniport
AddReg         = pnpsafe_pci_addreg

;*************************************************************
;These addreg sections should be used when installins services to indicate
;which interface types are safe for PNP and which aren't.  INTERFACE_TYPE
;is defined in NTDDK.H

[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001

;*************************************************************
;The EventLog entries are the same for all SCSI miniports.
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg

[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,%REG_DWORD%,7

[SourceDisksNames]
1 = %InstallDisk%,\disk1,,,
2 = %InstallDisk%,\disk1,,\WIN98_ME
3 = %InstallDisk%,\disk1,,\Win_NT
4 = %InstallDisk%,\disk1,,\Win_2000

[SourceDisksFiles]
;;ata1200a.inf = 1,,
ata1200a.sys = 1,,

[NODRV_AddReg]
;Dummy AddReg section 

[strings]
Adaptec="Adaptec"
PCI\VEN_1103&DEV_0004&REV_03.DeviceDesc="Adaptec ATA RAID 1200A Controller"
PCI\VEN_1103&DEV_0004&REV_04.DeviceDesc="Adaptec ATA RAID 1200A Controller"
SCSI\ProcessorADAPTEC_RCM_DEVICE______.DeviceDesc = "Adaptec RCM Device"
InstallDisk = "Adaptec ATA RAID 1200A Driver Diskette"

;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER  = 1
SERVICE_BOOT_START     = 0
SERVICE_ERROR_NORMAL   = 1
REG_EXPAND_SZ          = 0x00020000
REG_DWORD              = 0x00010001