iwpriv ================= This is detailed explanation of each parameters for iwpriv. Before reading this document, make sure you already read README. ------------------------------------------------------------------------------------------------------- USAGE_1: iwpriv rausb0 set [parameters]=[val] NOTE: Execute one iwpriv/set command simultaneously. DESCRIPTION [parameters] [val] /{range} ----------------- ------------------------------------------------- CountryRegion {0~7} ::Set country region 0: 1 ~ 11 ch 1: 1 ~ 13 ch 2: 10, 11 ch 3: 10 ~ 13 ch 4: 14 ch 5: 1 ~ 14 ch 6: 3 ~ 9 ch 7: 5 ~ 13 ch CountryRegionABand {0~10} ::Set country region for A band 0: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 ch 1: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch 2: 36, 40, 44, 48, 52, 56, 60, 64 ch 3: 52, 56, 60, 64, 149, 153, 157, 161 ch 4: 149, 153, 157, 161, 165 ch 5: 149, 153, 157, 161 ch 6: 36, 40, 44, 48 ch 7: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 ch 8: 52, 56, 60, 64 ch 9: 34, 38, 42, 46 ch 10: 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 ch SSID {0~z, 1~32 ascii characters} ::Set AP SSID WirelessMode {0~4} ::Set Wireless Mode 0:11b/g mixed, 1:11B only, 2:11A only 3:11a/b/g mixed, 4:11G only TxRate {0~12} ::Set TxRate of Infrastructure mode 0:Auto, 1:1Mbps, 2:2Mbps, 3:5.5Mbps, 4:11Mbps, 5:6Mbps, 6:9Mbps, 7:12Mbps, 8:18Mbps, 9:24Mbps, 10:36Mbps, 11:48Mbps, 12:54Mbps Channel depends on CountryRegion or CountryRegionABand ::Set Channel BGProtection {0~2} ::Set 11B/11G Protection 0:Auto, 1:Always on, 2:Always off TxPreamble {0~2} ::Set TxPreamble 0:Preamble Long, 1:Preamble Short, 2:Auto RTSThreshold {1~2347} ::Set RTS Threshold FragThreshold {256~2346} ::Set Fragment Threshold TxBurst {0,1} ::Set TxBurst Enable or Disable 0:Disable, 1:Enable NetworkType {Infra,Adhoc} ::Set Network type AdhocOfdm {0~3} ::Set Adhoc Wireless Mode 0: WIFI mode(11b rates only), 1: b/g mixed, 2: 11g only, 3: 11a only AuthMode {OPEN,SHARED,WEPAUTO,WPAPSK,WPA2PSK,WPANONE} ::Set Authentication Mode EncrypType {NONE,WEP,TKIP,AES} ::Set Encryption Type DefaultKeyID {1~4} ::Set Default Key ID Key1 {5 ascii characters or 10 hex number or 13 ascii characters or 26 hex numbers} ::Set Key1 String Key2 {5 ascii characters or 10 hex number or 13 ascii characters or 26 hex numbers} ::Set Key2 String Key3 {5 ascii characters or 10 hex number or 13 ascii characters or 26 hex numbers} ::Set Key3 String Key4 {5 ascii characters or 10 hex number or 13 ascii characters or 26 hex numbers} ::Set Key4 String WPAPSK {8~63 ascii or 64 hex characters} ::WPA Pre-Shared Key PSMode {CAM, MAX_PSP, FAST_PSP} ::Set Power Saving Mode IEEE80211H {0,1} ::Set IEEE80211H Enable or Disable 0: Disable 1: Enable spectrum management (This field can be enable only in A band) ------------------------------------------------------------------------------------------------------- USAGE_2: iwpriv rausb0 [parameters] [val] DESCRIPTION [parameters] [val] range explaination ----------------- ----------------------- ------------------------------------------ auth {1~5} 1:OPEN Authentication Mode 2:SHARED 3:WPAPSK 4:WPA2PSK 5:WPANONE enc {1~4} 1:NONE Encryption Type 2:WEP 3:TKIP 4:AES wpapsk {8~64 chars} WPAPSK/WPA2PSK Password psm {0~2} 0:constantly awake mode (CAM) Power Saving Mode 1:MAX_PSP 2:FAST_PSP ------------------------------------------------------------------------------------------------------- Examples ================= ------------------------------------------------------------------------------------------------------- a> Config STA to link with AP which is OPEN/NONE(Authentication/Encryption) 1. iwpriv rausb0 set NetworkType=Infra 2. iwpriv rausb0 set AuthMode=OPEN 3. iwpriv rausb0 set EncrypType=NONE 4. iwpriv rausb0 set SSID="AP's SSID" b> Config STA to link with AP and OPEN/WEP(Authentication/Encryption). Default Key ID = 3 1. iwconfig rausb0 key [3] 2. iwconfig rausb0 key s:abcde 3. iwconfig rausb0 essid "AP's SSID" c> Config STA to link with AP which is SHARED/WEP(Authentication/Encryption). 1. iwpriv rausb0 set NetworkType=Infra 2. iwpriv rausb0 set AuthMode=SHARED 3. iwpriv rausb0 set EncrypType=WEP 4. iwpriv rausb0 set Key1="AP's wep key" 5. iwpriv rausb0 set DefaultKeyID=1 6. iwpriv rausb0 set SSID="AP's SSID" d> Config STA to link with AP which is WPAPSK/TKIP(Authentication/Encryption) 1. iwpriv rausb0 set NetworkType=Infra 2. iwpriv rausb0 set AuthMode=WPAPSK 3. iwpriv rausb0 set EncrypType=TKIP 4. iwpriv rausb0 set SSID="AP's SSID" 5. iwpriv rausb0 set WPAPSK="12345678" 6. iwpriv rausb0 set SSID="AP's SSID" p.s Step 4 is part of generating wpapsk password and is necessary. e> Config STA to link with AP which is WPAPSK/AES(Authentication/Encryption) 1. iwconfig rausb0 mode managed 2. iwpriv rausb0 auth 3 3. iwpriv rausb0 enc 4 4. iwconfig rausb0 essid "AP's SSID" 5. iwpriv rausb0 wpapsk 12345678 6. iwconfig rausb0 essid "AP's SSID" f> Config STA to link with AP which is WPA2PSK/TKIP(Authentication/Encryption) 1. iwpriv rausb0 set NetworkType=Infra 2. iwpriv rausb0 set AuthMode=WPA2PSK 3. iwpriv rausb0 set EncrypType=TKIP 4. iwpriv rausb0 set SSID="AP's SSID" 5. iwpriv rausb0 set WPAPSK="12345678" 6. iwpriv rausb0 set SSID="AP's SSID" g> Config STA to create/link as adhoc mode, which is OPEN/NONE(Authentication/Encryption) 1. iwpriv rausb0 set NetworkType=Adhoc 2. iwpriv rausb0 set AuthMode=OPEN 3. iwpriv rausb0 set EncrypType=NONE 4. iwpriv rausb0 set SSID="Adhoc's SSID" h> Config STA to create/link as adhoc mode, which is WPANONE/TKIP(Authentication/Encryption) 1. iwpriv rausb0 set NetworkType=Adhoc 2. iwpriv rausb0 set AuthMode=WPANONE 3. iwpriv rausb0 set EncrypType=TKIP 4. iwpriv rausb0 set SSID="AP's SSID" 5. iwpriv rausb0 set WPAPSK=12345678 6. iwpriv rausb0 set SSID="AP's SSID" i> Get site survey iwpriv rausb0 get_site_survey j> Get Statistics iwpriv rausb0 stat ; read statistic counter iwpriv rausb0 set ResetCounter=0 ; reset statistic counter k> Link with any AP without security ; set ANY SSID with non-security usage: iwpriv ra0 set SSID="" iwpriv rausb0 set AuthMode=OPEN iwpriv rausb0 set EncrypType=NONE =================================================================== iwlist ================= This is detailed explanation of each parameters for iwlist. ------------------------------------------------------------------------------------------------------- iwlist rausb0 scanning ; list the results after scanning(manual rescan) ======================================================================================================= iwconfig ================= The following are our support in standard configuration - iwconfig ------------------------------------------------------------------------------------------------------- iwconfig rausb0 essid {NN|on|off} ; set ssid iwconfig rausb0 mode {managed|ad-hoc|...} ; set wireless mode iwconfig rausb0 freq N.NNNN[k|M|G]] ; set frequency iwconfig rausb0 channel N ; set channel iwconfig rausb0 ap {N|off|auto} ; set ap address iwconfig rausb0 nick N ; set nickname iwconfig rausb0 rate {N|auto|fixed} ; set rate iwconfig rausb0 rts {N|auto|fixed|off} ; set rts threshold iwconfig rausb0 frag {N|auto|fixed|off} ; set fragment threshold iwconfig rausb0 enc {NNNN-NNNN|off} ; set encryption type iwconfig rausb0 power {period N|timeout N} ; set power management modes iwconfig rausb0 key {[id]|s:pswd|pswd} ; set wep key *** Please refer to man page of 'iwconfig', 'iwlist' and 'iwpriv'. ***Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.