;---------------------------------------------------------------- ; ; ADPU320.INF -- This is the INF that supports ; Adaptec Ultra320 SCSI Controllers for ; Windows 32-bit ; ; Copyright 2010 Adaptec, Inc. All rights reserved. ; ; This software contains the valuable trade secrets of Adaptec ; or its licensors. The software is protected under international ; copyright laws and treaties. This software may only be used in ; accordance with the terms of its accompanying license agreement. ; ;---------------------------------------------------------------- ;---------------------------------------------------------------- ; ; [Version] ; ; Class and ClassGUID are defined in devguid.h ; ;---------------------------------------------------------------- [Version] signature="$Windows NT$" Class=SCSIAdapter ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318} Provider=%INF_PROVIDER% CatalogFile.ntx86="adpu320.cat" DriverVer=01/28/2010,7.00.00.12 ;---------------------------------------------------------------- ; ;[SourceDisksNames] ; ; diskid = description[,[tagfile][,<unused>,subdir]] ; ;---------------------------------------------------------------- [SourceDisksNames.x86] 1 = %Floppy_Description%,,, ;---------------------------------------------------------------- ; ; [SourceDisksFiles.x86] ; ; filename_on_source = diskid[,[subdir][,size]] ; ;---------------------------------------------------------------- [SourceDisksFiles.x86] adpu320.sys = 1,, ;---------------------------------------------------------------- ; ; [Manufacturer] ; ; manufacturer-name ; %strkey%=models-section-name ; [%strkey%=models-section-name] ... ; ;---------------------------------------------------------------- ; Table of Contents [Manufacturer] %ADP%= ADAPTEC ;---------------------------------------------------------------- ; ; [ControlFlags] ; ;---------------------------------------------------------------- [ControlFlags] ;ExcludeFromSelect=PCI\VEN_9005&DEV_801F ;ExcludeFromSelect=PCI\VEN_9005&DEV_8011&SUBSYS_00419005 ;ExcludeFromSelect=PCI\VEN_9005&DEV_8011&SUBSYS_00AC0E11 ;ExcludeFromSelect=PCI\VEN_9005&DEV_801F&SUBSYS_005F9005 ;CopyFilesOnly= ;---------------------------------------------------------------- ; ; Models ; ; device-description=install-section-name,hw-id[,compatible-id...] ; ; "*" indicates that device is supported by more than one ; enumerator. ; ;---------------------------------------------------------------- [ADAPTEC] ;************************************ ; Adaptec Ultra320 SCSI Host Adapters ; %PCI\VEN_9005&DEV_801D.DeviceDesc% = adpu320_Inst,PCI\VEN_9005&DEV_801D %PCI\VEN_9005&DEV_801E.DeviceDesc% = adpu320_Inst,PCI\VEN_9005&DEV_801E %PCI\VEN_9005&DEV_801F.DeviceDesc% = adpu320_Inst,PCI\VEN_9005&DEV_801F %PCI\VEN_9005&DEV_800F.DeviceDesc% = adpu320_Inst,PCI\VEN_9005&DEV_800F %PCI\VEN_9005&DEV_800F&SUBSYS_005F9005.DeviceDesc% = adpu320_Inst,PCI\VEN_9005&DEV_800F&SUBSYS_005F9005 %PCI\VEN_9005&DEV_8000&SUBSYS_00609005.DeviceDesc% = adpu320_Inst,PCI\VEN_9005&DEV_8000&SUBSYS_00609005 %PCI\VEN_9005&DEV_8010&SUBSYS_00409005.DeviceDesc% = adpu320_Inst,PCI\VEN_9005&DEV_8010&SUBSYS_00409005 %PCI\VEN_9005&DEV_8011&SUBSYS_00419005.DeviceDesc% = adpu320_Inst,PCI\VEN_9005&DEV_8011&SUBSYS_00419005 %PCI\VEN_9005&DEV_8012&SUBSYS_00429005.DeviceDesc% = adpu320_Inst,PCI\VEN_9005&DEV_8012&SUBSYS_00429005 %PCI\VEN_9005&DEV_8014&SUBSYS_00449005.DeviceDesc% = adpu320_Inst,PCI\VEN_9005&DEV_8014&SUBSYS_00449005 %PCI\VEN_9005&DEV_8015&SUBSYS_00409005.DeviceDesc% = adpu320_Inst,PCI\VEN_9005&DEV_8015&SUBSYS_00409005 %PCI\VEN_9005&DEV_8016&SUBSYS_00409005.DeviceDesc% = adpu320_Inst,PCI\VEN_9005&DEV_8016&SUBSYS_00409005 %PCI\VEN_9005&DEV_8017&SUBSYS_00449005.DeviceDesc% = adpu320_Inst,PCI\VEN_9005&DEV_8017&SUBSYS_00449005 %PCI\VEN_9005&DEV_8017&SUBSYS_00459005.DeviceDesc% = adpu320_Inst,PCI\VEN_9005&DEV_8017&SUBSYS_00459005 ;---------------------------------------------------------------- ; ; Install ; ;---------------------------------------------------------------- [adpu320_Inst.ntx86] CopyFiles=@adpu320.sys [adpu320_Inst.ntx86.HW] DelReg = LegacyScsiportValues ;---------------------------------------------------------------- ; ; Services ; ; Flag = 0x1 (SPSVCINST_TAGTOFRONT) ; Make sure that device loads at ; the front of its group ; ;---------------------------------------------------------------- [adpu320_Inst.ntx86.Services] AddService = adpu320, 0x2, adpu320_Service_Inst, Miniport_EventLog_Inst [adpu320_Service_Inst] DisplayName=%DisplayDriverName% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 0 ; SERVICE_BOOT_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %12%\adpu320.sys LoadOrderGroup = SCSI Miniport AddReg = pnpsafe_pci_addreg AddReg = Bus_Type_Raid [Bus_Type_Raid] HKR, "Parameters", "BusType", %FLG_ADDREG_TYPE_DWORD%, 0x00000001 [pnpsafe_pci_addreg] HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001 ;---------------------------------------------------------------- ; ; Event Log Install ; ;The NT EventLog entries are the same for all SCSI miniports. ; ;---------------------------------------------------------------- [Miniport_EventLog_Inst] AddReg = Miniport_EventLog_AddReg [Miniport_EventLog_AddReg] HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll" HKR,,TypesSupported,0x00010001,7 HKLM,SYSTEM\CurrentControlSet\Services\adpu320\Parameters\Device,NumberOfRequests,0x10001,255 HKLM,SYSTEM\CurrentControlSet\Services\adpu320\Parameters\Device,MaximumSGList,0x10001,65 HKLM,System\CurrentControlSet\Services\adpu320\Parameters\Device,"DriverParameter",0x00000000,"/MAXTAGS=32" HKLM,SYSTEM\CurrentControlSet\Services\Disk,TimeOutValue,0x00010001,0x0000003C ;---------------------------------------------------------------- ; SCSIPort Legacy Interface ;---------------------------------------------------------------- [LegacyScsiportValues] HKR,Scsiport,BusNumber HKR,Scsiport,LegacyInterfaceType HKR,Scsiport,SlotNumber HKR,Scsiport ;---------------------------------------------------------------- ; ; [DestinationDirs] ; ; file-list-section=dirid[,subdir]] ... ; ;---------------------------------------------------------------- [DestinationDirs] DefaultDestDir = 12 ; DIRID_DRIVERS (this is IOSubsys on ; Win95, and System32\Drivers on NT) ;---------------------------------------------------------------- ; ; [Strings] ; ;---------------------------------------------------------------- [Strings] INF_PROVIDER="Adaptec" ADP="Adaptec" FLOPPY_DESCRIPTION="Adaptec Ultra320 Family Manager Set for Windows 32-bit" DisplayDriverName="Adaptec Ultra320 SCSI" ;********************************** ; Adaptec Ultra320 SCSI Controllers ; ; PCI\VEN_9005&DEV_801D.DeviceDesc = "Adaptec AIC-7902B - Ultra320 SCSI" PCI\VEN_9005&DEV_801E.DeviceDesc = "Adaptec AIC-7901 - Ultra320 SCSI" PCI\VEN_9005&DEV_801F.DeviceDesc = "Adaptec AIC-7902 - Ultra320 SCSI" PCI\VEN_9005&DEV_800F.DeviceDesc = "Adaptec AIC-7901 - Ultra320 SCSI" PCI\VEN_9005&DEV_800F&SUBSYS_005F9005.DeviceDesc = "Adaptec AIC-7901 - Ultra320 SCSI" PCI\VEN_9005&DEV_8000&SUBSYS_00609005.DeviceDesc = "Adaptec SCSI Card 29320A - Ultra320 SCSI" PCI\VEN_9005&DEV_8010&SUBSYS_00409005.DeviceDesc = "Adaptec SCSI Card 39320 - Ultra320 SCSI" PCI\VEN_9005&DEV_8011&SUBSYS_00419005.DeviceDesc = "Adaptec SCSI Card 39320D - Ultra320 SCSI" PCI\VEN_9005&DEV_8012&SUBSYS_00429005.DeviceDesc = "Adaptec SCSI Card 29320 - Ultra320 SCSI" PCI\VEN_9005&DEV_8014&SUBSYS_00449005.DeviceDesc = "Adaptec SCSI Card 29320LP - Ultra320 SCSI" PCI\VEN_9005&DEV_8015&SUBSYS_00409005.DeviceDesc = "Adaptec SCSI Card 39320 - Ultra320 SCSI" PCI\VEN_9005&DEV_8016&SUBSYS_00409005.DeviceDesc = "Adaptec SCSI Card 39320A - Ultra320 SCSI" PCI\VEN_9005&DEV_8017&SUBSYS_00449005.DeviceDesc = "Adaptec SCSI Card 29320ALP - Ultra320 SCSI" PCI\VEN_9005&DEV_8017&SUBSYS_00459005.DeviceDesc = "Adaptec SCSI Card 29320LPE - Ultra320 SCSI" ;******************************************* ;Handy macro substitutions (non-localizable) FLG_ADDREG_TYPE_DWORD = 0x00010001Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.