==========================================================================
TM-T88V Remote Configuration Tool
Copyright (C) SEIKO EPSON CORPORATION 2010-2013. All rights reserved.
==========================================================================
1. Overview
Remote Configuration Tool is a function that is used to change settings
and monitor the status of printers connected by parallel/serial/USB to
client computers (POS and KIOSK terminals) from an administrator computer
over the network using EpsonNet Simple Viewer and a model-specific
utility prepared for each TM/BA/EU printer.
The printer status can be monitored in a list even when the customer
application is running.
2. Building the Environment
Follow the steps below to build the environment.
If multiple client computers will be monitored, build the environment on
each computer.
2.1 Building the environment on the administrator computer
1) Install TM-T88V Utility
Execute "TM-T88VUtility140.exe". Install TM-T88V Utility following
the instructions on the screen.
2) Install Simple Viewer
Execute "ensv240b.exe". Install Simple Viewer following the instructions
on the screen.
3) Firewall settings
For the procedure for firewall settings, refer to [TM / BA /EU Printer
Remote Configuration Tool User's Manual].
2.2 Building the environment on the client computer
1) Install the driver
Install Advanced Printer Driver, UPOS Driver, or TM/BA Thermal Linux Driver.
For the procedure for installing the driver, refer to [TM-T88V Software
User's Manual], [Advanced Printer Driver Install Manual], or other
respective manual.
2) Firewall settings
For the procedure for firewall settings, refer to [TM / BA /EU Printer
Remote Configuration Tool User's Manual].
End.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.