1. ep1427.exe Driver
2. Manual.txt File Contents

Manual.txt Driver File Contents (ep1427.exe)

<<<  USB To Ethernet Adapter User's Guide >>>


Introduction
============

USB To Ethernet Adapter is designed to connect USB-equipped a desktop,
notebook, or USB hub to an Ethernet network. It performs the same function
as traditional Network Interface Cards without opening up the PC and installing
the card. A USB-equipped PC can simply connect an Ethernet network with this
USB To Ethernet Adapter, users can share files between computers, use printers
and Internet access, send and receive e-mails, access CD-ROM/backup drive
attached to others PCs, etc.

* Hassle-Free Connection

USB (Universal Serial Bus) is a new type of connector to replace all the
different kinds of serial and parallel port connectors with one standardized
plug and port combination. It can reduce connection confusions when adding,
removing, or swapping any devices to PCs. Just plug into the USB port of at
the back of your PC without opening up the PC, installing add-in cards, or
setting DIP switch or IRQs.

* Hot-swapping

The USB To Ethernet Adapter features "hot-swapping" and doesn't need to
shut down and restart your PC to attach, add, or remove a peripheral. Just
plug it in easily and go! The PC automatically detects the peripheral and
configures the necessary software. Users of multi-player games, business
and notebook PC users who want to share peripherals all can take the most
advantages.

* Easy Installation

The USB To Ethernet Adapter provides easy-to-install steps and drivers for
compatibility with PC is running the Windows 98 network operating system.
LEDs on the adapter indicate the network and traffic status for simple
troubleshooting.


Key Features
============

* Easy to connect USB-equipped desktop PCs or notebook to an Ethernet network.
* Simple to install without opening up your PC.
* No hassles of I/O address or IRQ settings.
* Hot swapping.
* Compatible with Windows 98 / Windows 98 Second Edition / Windows 2000 / Windows Me / Windows XP
* Two diagnostic LEDs to indicate USB and network status.
* No external power adapter required and bus-power driven from the Universal
  Serial Bus host controller.
* Portable design and pocket size.


Technical Specification
=======================

* Standard: IEEE 802.3 10BASE-T and USB Ver. 1.0/1.1
* Date Transfer Rate: 10Mbps
* Memory Size: 32Kbyte
* Media Support: 1 RJ-45 and 1 USB B-type ports
* LED Display: Link, and Ready
* Power: Bus power from USB host controller
* Dimension: 5.4 x 3.75 x 3.3 cm (DxWxH)
* Net Weight: 47.5g
* Temperature: 0¢XC~55¢XC (Operating); -20¢XC~70¢XC (Storage)
* Humidity: 10~90%
* Certification: FCC, CE Mark


Package Contents
================

* One USB To Ethernet Adapter
* One A-B Cable (1 meter)
* One diskette embedded with drivers and user's guide


Hardware
========

* LED indicators

The LED indicators include Link and Ready.
LNK: The LED is on when there is an active Ethernet connection.
RDY: The LED is on means that the host is connected ready.

* Connectors

It consists of 1 RJ-45 and 1 USB B-type ports.

RJ-45 Port:
This port is used for connection to an Ethernet 10BASE-T network.

USB B-type Port:
This port is used to connect the USB B-type connector of the USB cable in
conjunction with USB-equipped desktop PC / Network



Installation
============

Step 1.
Plug the USB To Ethernet Adapter into USB connector of PC, Windows 98 prompts
"New Hardware Found" window.

Step 2.
This "Add New Hardware Wizard" window means that Windows 98 is attended to
search a suitable driver for the USB To Ethernet Adapter.

Step 3.
Windows 98 prompts you to decide the way of driver installation. Choose
"Search for the best driver for your device" and then click "Next" button.

Step 4.
Insert driver diskette to floppy A:, and choose "Specify a location", and type
in "a:"

Step 5.
Windows 98 finds the driver of the USB To Ethernet Adapter, then click "Next".

Step 6.
Windows 98 prompts you to insert diskette again, just click "OK".

Step 7.
Windows 98 prompts you to locate the device driver "USBENET.SYS", please type
in a: and make sure that your driver diskette is in floppy A:, then click "OK".

Step 8.
Windows 98 finishes installing the software for the "USB To Ethernet Adapter",
click "Finish".

Step 9.
Windows 98 prompts you to restart your computer, click "Yes" to finish driver
installation.

Notices:
=======
Please don't swap continually before the host finishes detecting when the
USB To Ethernet Adapter is connected to the host or other devices;
otherwise the system will shut down and reboot.


FCC Statement
=============

This equipment can generate, use and radiate radio frequency energy and,
if not installed and used in accordance with the instructions in this
manual, may cause interference to radio communications.  This equipment has
been tested and found to comply with the limits for a Class A computing
device pursuant to Subpart J of Part 15 of the FCC rules, which are designed
to provide reasonable protection against radio interference when operated in
a commercial environment. Operation of this equipment in a residential area
is likely to cause interference, in which case the user, at his own expense,
will be required to take whatever measures are necessary to correct the
interference.


CE Declaration of conformity
============================

This equipment complies with the requirements relating to electromagnetic
compatibility, EN 55022 class A for ITE and EN 50082-1. This meets the
essential protection requirements of the European Council Directive
89/336/EEC on the approximation of the laws of the Member States relating
to electromagnetic compatibility.


Trademarks
==========

All company, brand, and product names are trademarks or registered
trademarks of their respective companies.

------------------------------- End of Manual.txt -------------------------