************************************************************************
* *
* SURECOM EP-427X 16-bit 100/10M Fast Ethernet PCMCIA Adapter *
* *
************************************************************************
Microsoft Network Client 3.0 for MS-DOS
=======================================
Sample Configuration Files:
---------------------------
PROTOCOL.INI (install creates this file)
[network.setup]
version=0x3110
netcard=EP427X,1,EP427X,1
transport=ms$ndishlp,MS$NDISHLP
transport=ms$netbeui,MS$NETBEUI
lana0=EP427X,1,ms$netbeui
lana1=EP427X,1,ms$ndishlp
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
[MS$NDISHLP]
DriverName=ndishlp$
BINDINGS=EP427X
[MS$NETBEUI]
DriverName=netbeui$
SESSIONS=10
NCBS=12
BINDINGS=EP427X
LANABASE=0
[EP427X]
DriverName=EP427X$
Installation Procedure : ( Location of Driver: \MSCLIENT\EP427X.DOS )
----------------------
1. Change to the Microsoft Network Client subdirectory, and run
SETUP.EXE
2. The screen will display some infomation. Press <Enter> .
3. Responds to the screen prompts, selecting "Change Network
Configuration",then press <Enter>.
4. Move the highlight to "Add Adapter", press <Enter>.
5. Select "Network adapter not shown on list below ...".
6. Insert the SURECOM EP-427X driver diskette in floppy A,and
specify your pathname A:\MSCLIENT ,then press <Enter>.
7. Follow screen instructions to complete the process. Simply
pressing <Enter> for each screen display will select the default
options. Press <Enter> until you reach the display prompting you
to reboot your system.
------------------------------ End of File -------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.