***************************************************************************** * * * CardBus Fast Ethernet PC Card * * Driver Installation for Microsfot Windows for Workgroups 3.11 * * * ***************************************************************************** Installation Procedure ---------------------- 1. In Program Manager, open "Network" -> "Network Setup" -> "Drivers". 2. In "Network Drivers" window, select "Add Adapter". 3. When installing the LAN driver, Windows for Workgroups will present a list of all available drivers. But the PC Crad driver is not included in the system software. Select "Unlisted" for 3rd party adapters not in the driver list. 4. Windows for Workgroups will ask for the drive/path containing the PC Crad drivers. Provide the path to the OEMSETUP.INF file in the root directory. eg. A:\ if installing from the provided driver disk. Windows for Workgroups should copy the appropriate drivers to the Windows for Workgroups system. 5. Select the "CardBus Fast Ethernet 10/100 PC Card". At this point, the drivers have been properly copied and the installation would proceed to the next step. Please refer to your Windows for Workgroups installation guide for the correct procedures. After the initial installation, the drivers will be permanently installed into the Windows for Workgroups system. Subsequent accesses to the network driver list will include these drivers as options. Advanced Setup -------------- The Windows for Workgroups driver configures the adapter card to operate in autosensing mode by default. In this mode, the card automatically selects the most appropriate operating speed and duplex mode. There might be instances when you need to force the adapter card to operate at a particular speed and duplex mode. The following procedure guides you into the Windows for Workgroups system for this setting. 1. In Program Manager, open "Network" -> "Network Setup" -> "Drivers". 2. In "Network Drivers" window, select the "Setup" button. 3. Click on the "Advanced" button and then click on the "Connection Type" selection. 4. The bottom windows will show the following possible selections: AutoDetect _100BaseTx_FD _100BaseTx _10BaseT_FD _10BaseT_Half Choose the appropriate setting as needed.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.