1. fe2000.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (fe2000.exe)

*****************************************************************************
*                                                                           *
*               CardBus Fast Ethernet Adapter Card                          *
*               README.TXT Manual Supplement                                *
*               Copyright (C) 1998                                          *
*                                                                           *
*****************************************************************************

This document contains information that supplements the "User's Manual"
and accompanying software.

CONTENTS

1. What's New
2. Notes on Setup
3. Drivers Supported on this Drivers Disk
4. Notes on using EMM386 or QEMM
5. Technical Support
6. Machine Specific Notes

1. What's New
   ==============
  The CardBus is 32-Bit PC Card which runs with better performance than
  16-Bit PC Card.

  The CardBus Fast Ethernet supports the AutoSense, 100BaseTX Full Duplex,
  100BaseTx Half Duplex mode, 10BaseT Full Duplex mode, and
  10BaseT Half Duplex mode.

2. Notes on Setup
   ==============

  For Novell, Lan Manager & Packet Driver, first insert the "Drivers Disk"
  into drive A, and type INSTALL at the A drive command prompt.
  The Installation program will copy files to the destination directory and
  modify your related files e.g. CONFIG.SYS &   NET.CFG, automatically.

      C:\> A:
      A:\> INSTALL

  For Windows NT & Windows 95, use the "Network Setup"
  utility provided by windows system to install the CardBus Fast Ethernet
  Adapter to the system and system will load the drivers at start up time.

  After installation, simply reboot the machine to enable CardBus Fast
  Ethernet Card.



3. Drivers Supported on this release of the Drivers Disk
   =====================================================

  CB100EN.EXE    Enabler Driver
  CB100.COM      DOS/ODI Driver working with direct enabler or card service
  CB100.DOS      NDIS2 Driver working with direct enabler or card service
  CB100PD.COM    Packet Driver working with direct enabler or card service
  CB100.SYS      Enhance Mode NDIS Driver for Windows 95/98 and Windows NT.


4. Notes on using EMM386 or QEMM
   =============================

  If your computer's CONFIG.SYS file has the EMM386.EXE command line,
  please make sure the memory range D000-D7FF is excluded.
  Because the Card Services need this range to allocate resources for
  the adapter.

                   *** Example command line ***
            -------------------------------------------
            DEVICE=C:\DOS\EMM386.EXE NOEMS X=D000-D7FF


5. Technical Support
   =================

  If you still cannot get the PCMCIA Card working properly, our
  technical experts are always ready to help.  Please be at your
  computer, have the PCMCIA Card, Drivers Disk, and the following
  information available:

  * The extact text of any error message displayed on your screen
  * The type of computer
  * The type of network
  * The detail content of the CONFIG.SYS and AUTOEXEC.BAT files

6. Machine Specific Notes
   =================

   The CardBus Fast Ethernet Adapter has been tested with and
   is compatible with the following CardBus equipped computers:


   PC AT Compatible

     -For Windows NT 4.0, the following IO Port, IRQ Number, IRQ Type
      settings have been used successfully:

      IO Port=E000, IRQ Number=Auto


   NEC Nr15 PC-9821

     -For Windows NT 4.0, the following IO Port, IRQ Number, IRQ Type
      settings have been used successfully:

      IO Port=E000, IRQ Number=5



   NEC VersaPro Nx VP23C

     -For Windows NT 4.0, the following IO Port, IRQ Number, IRQ Type
      settings have been used successfully:

      IO Port=E000, IRQ Number=11