NCSA.TXT Driver File Contents (16tx0521.exe)

==================================================================
NOTES ON
Installing FE-Card Fast Ethernet PC Card
For NCSA Users
==================================================================
    (c) Copyright 1998 , ALL RIGHTS RESERVED



This document contains installation notes, which is not included in the
FE-Card Fast Ethernet PC Card USER'S GUIDE or onscreen instructions,
for NCSA users regarding FE-Card Fast Ethernet PC Card installation.


This document contains information on the following topics:

1.0 Introduction
2.0 Installing Pcaket driver
___________________________________________________________________



1.0 Introduction
----------------

NCSA users please also refer to the following:

    -------------------------------------------------------------------
     File                  Description/Installation notes
    -------------------------------------------------------------------
     \PKTDRV\README.TXT    For all Packet driver users



2.0 Installing Pcaket driver
------------------------------

    Here are the steps:

    1. To load a driver , use either of the following methods:

       METHOD 1:
          In your CONFIG.SYS file, include the DEVICE command.

               Format:
               DEVICE = FECARDPD.SYS [/option] <packet_int_no>


        METHOD 2:
          Issue FECARDPD command at the DOS command prompt.

               Format:
               FECARDPD.COM [/option] <packet_int_no>


    2. you need to install NCSA TCP/IP distributions into your
       computer. (Also refer to NCSA TCP/IP distributions \INSTALL
       for more information.)

    3. Please set correct values in CONFIG.TEL which is
       included in NCSA TCP/IP distributions as follows:

        CONFIG.TEL
        ----------
            :
            :
        hardware    = packet
        ioaddr      = <iobase>
        interrupt   = <irq>
            :
            :

        Please take note the above settings must be the same as
        driver's parameters.

    Now, the NCSA TCP/IP associated programs are ready to be used.



    Example:
    --------

    > FECARDPD.COM 0x62
    > EDIT CONFIG.TEL
                :
         hardware     = packet
         ioaddr       = <iobase>
         interrupt    = <irq>
                :
    > TELNET <IP_ADDRESS>



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.81