README.TXT Driver File Contents (ep427.exe)

   LAN Manager Workstation/Server

   Introduction:
   -------------
   This  document  describes  the  procedure  to   setup  LAN  Manager 2.1
   Workstation/Server driver for SureCom EP-427 PCMCIA ethernet adapter.

   Location of Driver:
           (DOS) \MSLANMAN.DOS\DRIVERS\ETHERNET\EP427\EP427.DOS
           (OS2) \MSLANMAN.DOS\DRIVERS\ETHERNET\EP427\EP427.OS2


   Sample Configuration Files:
   ---------------------------
      CONFIG.SYS (for DOS):

         DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS
         DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\EP427\EP427.DOS

      CONFIG.SYS (for OS2):

         DEVICE=C:\LANMAN.OS2\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.OS2
         DEVICE=C:\LANMAN.OS2\DRIVERS\ETHERNET\EP427\EP427.OS2


      PROTOCOL.INI (will contain):

         [EP427_NIF]
         ; EP-427 RPOTOCOL.INI SAMPLE

           DriverName = EP427$

   Setup Procedures:
   -----------------
      Before you  start  with the installation process, make sure that the
      adapter  is properly  installed  and   configured.  Make  sure  your
      Microsoft LAN Manager is properly installed.

      1. Run the appropriate Microsoft Lan Manager SETUP for computer  you
         are setting up. Select [Configuration] item , ( the EP-427 driver
         isn't  included on  the  Lan Manager disk ) and insert the EP-427
         driver disk, select the EP-427 driver and follow the directions.

      2. When completed, reboot your computer .

   Note
       After completion of the SETUP , you should modify the  PROTOCOL.INI
       file  to specify the INTERRUPT number  and the IOBASE number  which
       must be  equal to the /irq and /io parameters specified to the Card
       Enabler program.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.34