Installing the EP-427 PCMCIA Ethernet driver under Artisoft LANtastic 6.x
=========================================================================
The NDIS 2.0 driver currently is supported for LANtastic version 6.x only.
1. Run the LANtastic INSTALL program to install LANtastic and answer all
questions.
1. Under [ Select Network Adapter ] diaglogue box, select
[ NDIS Support for Network Adapters ].
2. Insert this EP-427 Driver diskette into drive A.
3. Under the [ Enter NDIS driver directory ] diaglogue box, type
"A:\LANTASTI"
2. After installation completes , you should modify the PROTOCOL.INI file
file to specify the INTERRUPT number and the IOBASE number , which must
be equal to the /irq and /io parameters specified to the Card enabler
program or client driver.
3. To start up the network, execute the STARTNET.BAT batch file.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.