1. ep320gtx1txl.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (ep320gtx1txl.zip)

           
      EP-320G-TX1/TXL SURECOM 32bit PCI Gigabit Ethernet Adapter
                   SCO OpenServer Version 5 Driver


Contents:
---------

1. File Description
2. Driver Installation for SCO OpenServer Version 5

1. File Description
-------------------

   A. README.TXT      Presents a summary of the contents for SCO OpenServer 
                      Version 5 driver installation.
                      
   B. IPGSCO5.VOL     IP1000 based 32-bit SCO OpenServer Version 5 Driver

2. Driver Installation for SCO OpenServer Version 5
---------------------------------------------------
  This document explains how to install IC Plus IP1000 Gigabit Ethernet 
Adapter in SCO OpenServer Version 5 syetem. This follows the procedures in 
"Installing and Managing software components"[custom(ADM)] and "Configuring 
network connections"[netconfig(ADM)] in SCO OpenServer Handbook.

A. Server Requirements:
   A PC with SCO OpenServer Version 5 and IC Plus IP1000-based Gigabit Ethernet
   Adapter. We need IC Plus IP1000 Gigabit Ethernet Adapter SCO OpenServer 5 
   MDI Network Driver "ipgsco5.vol".

B. Install IP1000 network adapter with SCO OpenServer 5 Driver software 
   component:[custom(ADM)]
   B.1 Copy our "ipgsco5.vol" to SCO5 system "/tmp" from floppy. 
       e.g [doscp a:ipgsco5.vol /tmp]
   B.2 Rename "ipgsco5.vol" to "VOL.000.000".
       e.g [cp ipgsco5.vol VOL.000.000]
   B.3 Run "custom" will show "Software Management(custom) on machine1", where
       'machine1' is your SCO5 system's name.
       Choose [Software]->[Install New...]->[From Machine1]->[Media Device: 
       Media Images]->[Image Directory: /tmp]-> Install...

C. Configure Network configuration:[netconfig(ADM)]
   C.1 Run "netconfig" for "Network Configuration Manager".
   C.2 Choose [Hardware]->[Add new LAN adapter]->[IC Plus IP1000 Gigabit 
       Ethernet Adapter]->[Bus #: Your Adapter PCI Bus number, Device #: Your
       Adapter PCI Device number]->[SCO TCP/IP]
       # Local Host name        : machine1
       # IP Address             : 192.168.1.1
       # Netmask                : 255.255.255.0
       # Broadcast Address      : 192.168.1.255
       # Domain name            :
       # TCP Connections        : 1024
       # Pseudo ttys            : 64
      *# Advanced Options->[GW] : Yes
  *C.3 Add another adapter to SCO Server. Choose [Hardware]->[Add new LAN 
       adapter]->[IC Plus IP1000 GigaBit Ethernet Adapter]->[Bus #:Your Adapter
       PCI Bus number, Device #: Your Adapter PCI Device number]->[SCO TCP/IP]
       # Local Host name        : machine2
       # IP Address             : 192.168.2.1
       # Netmask                : 255.255.255.0
       # Broadcast Address      : 192.168.2.255
       # Domain name            :
       # TCP Connections        : 1024
       # Pseudo ttys            : 64 
      *# Advanced Options->[GW] : Yes       
   C.4 Exit the manager and reboot the system to make the configuration take
       effect.
   Note [*]: Optional for configure the second adapter for SCO Server and 
             Server become a Router.
       

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.