EP-320G-TX1/TXL SURECOM 32bit PCI Gigabit Ethernet
NDIS2 DOS Driver
Contents:
---------
1. File Description
2. Driver Installation for Microsoft Network Client
3. Driver Installation for Microsoft LAN Manager
4. Parameters Description
1. File Description
-------------------
Filename Description
================= =========================================================
README.TXT Presents a summary of the contents for NDIS2 driver
installation.
MSLANMAN.DOS\ NDIS2 Driver
IPGND2.DOS This driver is compliant with NDIS 2.0.1 Driver SPEC.
MSLANMAN.DOS\ The driver installation file for Microsoft LAN Manager.
IPGND2.NIF
MSLANMAN.DOS\ The driver installation file for Microsoft Network
OEMSETUF.INF Client.
MSLANMAN.DOS\ The configuration information file for Protocol Manager.
PROTOCOL.INI
2. Driver Installation for Microsoft Network Client
----------------------------------------------------
2.1. Under Microsoft Network Client subdirectory c:\NET, run SETUP.
2.2. Move highlight to "Change Network Configuration", the press ENTER.
2.3. Select "Add Adapter", then press ENTER.
2.4. Select "Network card not shown in list below..", then press ENTER.
2.5. Insert the driver diskette in floppy A, and specify your
pathname A:\MSLANMAN.DOS, then press ENTER.
2.6. Select "EP-320G-TX1/TXL SURECOM 32bit PCI Gigabit Ethernet ", then press ENTER.
2.7. Move highlight to "Network Configuration is correct" to finish the
installation.
3. Driver Installation for Microsoft LAN Manager
------------------------------------------------
3.1. Copy IPGND2.NIF from your Driver diskette (A:\MSLANMAN.DOS) to Microsoft
LAN Manager subdirectory C:\LANMAN.DOS\DRIVERS\NIF,
Copy IPGND2.DOS and PROTOCOL.INI from your Driver diskette
(A:\MSLANMAN.DOS) to Microsoft LAN Manager subdirectory
C:\MSLANMAN.DOS\DRIVERS\ETHERNET\IPGND2.
3.2. Under Microsoft LAN Manager subdirectory c:\MSLANMAN.DOS, run SETUP.
3.3. Move highlight to "Configuration", the press ENTER.
3.4. Select "Add New Config", the press ENTER.
3.5. Select "EP-320G-TX1/TXL SURECOM 32bit PCI Gigabit Ethernet ", then press ENTER.
3.6. Move highlight to "Network Configuration is correct" to finish the
installation.
4. Parameters Description
-------------------------
The following parameters are used in IPGND2.DOS.
4.1 Connection Type
This parameter specify the connection speed. The accepted value are
AutoSense, S10HD_NWAY, S10FD_NWAY, S100HD_NWAY, S100FD_NWAY,
S1000FD_NWAY.
Histories of Release:
***) 1.01, 12-18-2003
first release.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.