1. ep320fx.exe Driver
2. PACKET.TXT File Contents

PACKET.TXT Driver File Contents (ep320fx.exe)

*****************************************************************************
*                                                                           *
*          SURECOM EP-320FX/EP-320FX-C Fast Ethernet Fiber Adapter          *
*                                                                           *
*                    Packet Driver for DOS Workstations                     *
*                                                                           *
*****************************************************************************

Introduction:
=============

  The Packet Driver for DOS workstations confirms to the PC/TCP version 1.09
  Packet driver specification. This document shows you how to setup the driver
  and how to use the enhanced functions by setting the custom keywords in
  configuration file.

Contents of the Subdirectory:
=============================

    FETPKT.COM          The Packet driver for DOS workstations.
    PACKET.TXT          This file.

Installation:
=============

  Before starting with the installation process, make sure that the adapter
  is properly installed and configured. You can use the diagnostic program
  (A:\SETUP.EXE) to make sure your connection with the network is correct.

  Installation Packet Driver:
  ---------------------------
    1) Copy the Packet driver to your HardDisk, suppose you copy it to
       C:\PACKET directory.
       EX: copy  a:\pktdrv\fetpkt.com  c:\packet\fetpkt.com

    2) Add the following line to C:\AUTOEXEC.BAT
           C:\PACKET\FETPKT -W 0x60 5 0x300

Configuration Files:
====================

    Sample of configuration file:
    -----------------------------
    (Suppose PACKET driver is copied to C:\PACKET directory)

    File Name:          C:\AUTOEXEC.BAT
    ----------
        C:\PACKET\FETPKT  -n  -w  0x60   5   0x300

      0x60 is software vector number this driver uses.
      -n means Novell packets can be transmitted across this driver
      -w means Window compatible.
      5  is IRQ value
      0x300 is IOBASE value

      Note: You don't have to define IRQ and IOBASE value as FETPKT parameters,
            driver will ignore these values.

    if you want to force assigning linespeed equal 100Mbs or 10Mbs,halfduplex
    or fullduplex , you can add parameter as follow:
    C:\PACKET\FETPKT -s100 -f -n 0x60  (speed=100Mbs fullduplex)
    C:\PACKET\FETPKT -s10 -h -n 0x60   (speed=10Mbs halfduplex)

------------------------------- End of File -----------------------------------