1. ep320fx.exe Driver
2. LMOS2.TXT File Contents

LMOS2.TXT Driver File Contents (ep320fx.exe)

*****************************************************************************
*                                                                           *
*         SURECOM EP-320FX/EP-320FX-C Fast Ethernet Fiber Adapter           *
*                                                                           *
*              NDIS2 Driver for MS LAN MANAGER OS2 Server                   *
*                                                                           *
*****************************************************************************

Introduction:
=============

  The Ethernet NDIS2 Driver for LAN MANAGER OS2 Server confirms to the
  Network Driver Interface Specification(NDIS2). This document shows you how
  to setup the driver and how to use the enhanced functions by setting the
  custom keywords in configuration file.


Contents of the Subdirectory:
=============================

    LMOS2.TXT           This file.
    FETND.OS2           The NDIS2 driver for LAN MANAGER OS2 Server.
    PROTOCOL.INI        Sample protocol.ini file.
    FETND.NIF           The installation information file.


Installation:
=============

  Before starting with the installation process, make sure that the adapter
  is properly installed and configured. You can use the diagnostic program
  (A:\SETUP.EXE) to make sure your connection with the network is correct.

  Installing driver procedure on LAN MANAGER OS2 Server:
  -----------------------------------------------------------

     1) If you install LAN Manager for the first time, you Install LAN Manager
        to your HardDisk by running SETUP.EXE program from the setup diskette.
        Upon completion of the workstation's last disk installation, you
        will be asked if you want to import additional network drivers.
        Answer "YES".

        If you have already installed LAN Manager in your hard disk, run
        SETUP.EXE from HardDisk and select "Actions"->"Import Network Driver"
        option.

     2) Insert the NDIS2 driver diskette into drive 'A' and follow the steps
        on the screen. Select the "SURECOM EP-320FX/EP-320FX-C Fast Ethernet
        Fiber Adapter" card and press "enter", then SETUP.EXE program will 
        copy the necessary NDIS2 driver programs from the driver diskette to
         your hard disk, according to LAN MANAGER file structure.

     3) Reboot your computer for the changes to take effect.



Configuration Files:
====================

    Sample of configuration file:
    -----------------------------
    (Suppose the Lan Requester package is installed at C:\NET directory)

    File Name:          C:\CONFIG.SYS
    ----------
        DEVICE=C:\IBMCOM\MACS\FETND.OS2

    File Name:          C:\STARTUP.CMD
    ----------
        NET START SERVER
        @if errorlevel 2 C:\IBMLAN\NETPROG\lserr.exe

    File Name:          C:\IBMCOM\PROTOCOL.INI
    ----------
        [IBMLXCFG]
           ...
           FETND_nif = FETND.nif
           ...
        [NETBEUI_nif]
           ...
           Bindings = FETND_nif
           ...
        [ODI2NDI_nif]
           ...
           Bindings = FETND_nif
           ...
        [TCPIP_nif]
           ...
           Bindings = FETND_nif
        [FETND_nif]
           DriverName    = FETND$
           Iobase        = 0x0300
           Interrupt     = 5

    Custom Keywords:
    ----------------
        FULLDUPLEX                      This keyword is used to enable full
                                        duplex mode.

        SPEED                           This keyword is used to force the
                                        adapter at 10M/100M speed.

        Note: FULLDUPLEX and SPEED should be used together.