FETND4.INF Driver File Contents (ep320fx.exe)

;setup information file for Windows 95/98

[Version]
Signature   = "$Chicago$"
Class       = Net
ClassGUID   = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider    = %Msft%
LayoutFile  = layout.inf

[Manufacturer]
%Manuf%     = MANUF

[ControlFlags]
ExcludeFromSelect = PCI\VEN_1106&DEV_3043&REV_00, \
                    PCI\VEN_1106&DEV_3043&REV_01, \
                    PCI\VEN_1106&DEV_3043&REV_02, \
                    PCI\VEN_1106&DEV_3043&REV_03, \
                    PCI\VEN_1106&DEV_3043&REV_04

[MANUF]
; DisplayName        Section        DeviceID
; -----------        -------        --------
%VT3043.DeviceDesc% = VT3043.ndi,   PCI\VEN_1106&DEV_3043



[VT3043.ndi]
AddReg          = VT3043.ndi.reg.WIN, FET.ndi.reg.WIN, FET.pci.reg, FET.con.reg



;-----------------------------------------------------------------------------
; VT3043 specific
;
[VT3043.ndi.reg.WIN]
HKR, ,                                      AdapterCFID,    0, "30431106"
HKR, ,                                      AdapterType,    0, "5"
HKR, ,                                      MediaType,      0, "1"
HKR, ,                                      BusType,        0, "5"
; WIN_98
HKR, ,                                      OsId,           0, "00000008"

HKR, Ndi,                                   DeviceID,       0, "PCI\VEN_1106&DEV_3043"

HKR, NDIS,                                  MajorNdisVersion,1,04
HKR, NDIS,                                  MinorNdisVersion,1,00

HKR, ,                                      DevLoader,      0, *ndis
HKR, NDIS,                                  LogDriverName,  0, "FETNDIS"
HKR, NDIS\NDIS2,                            DriverName,     0, "FETND$"
HKR, NDIS\NDIS2,                            FileName,       0, "fetnd.dos"
HKR, NDIS\ODI,                              DriverName,     0, "FETODI"
HKR, NDIS\ODI,                              FileName,       0, "fetodi.com"

;-----------------------------------------------------------------------------
; FET common driver parameters
;
[FET.ndi.reg.WIN]
HKR, Ndi\Interfaces,                        DefLower,       0, "ethernet"
HKR, Ndi\Interfaces,                        LowerRange,     0, "ethernet"
HKR, Ndi\Interfaces,                        DefUpper,       0, "ndis2,ndis3"
HKR, Ndi\Interfaces,                        UpperRange,     0, "odi,ndis2,ndis3"
HKR, ,                                      DeviceVxDs,     0, fetnd4.sys
; Install sections
HKR, Ndi\Install,                           ndis3,          0, "FET.ndis3"
HKR, Ndi\Install,                           ndis2,          0, "FET.ndis2"
HKR, Ndi\Install,                           odi,            0, "FET.odi"


;-----------------------------------------------------------------------------

;-----------------------------------------------------------------------------
; PCI common parameters
;
[FET.pci.reg]

; NDIS2 driver parameters:
; Auto Mode
HKR, Ndi\params\AUTO,                       ParamDesc,      0, "[NDIS2] AUTO MODE"
HKR, Ndi\params\AUTO,                       default,        0, 1
HKR, Ndi\params\AUTO,                       type,           0, enum
HKR, Ndi\params\AUTO\enum,                  1,              0, "Auto-Negotiation"
HKR, Ndi\params\AUTO\enum,                  0,              0, "Force-Mode"
HKR, Ndi\params\AUTO,                       flag,           1, 10,00,00,00
; Speed Mode
HKR, Ndi\params\SPEED,                      ParamDesc,      0, "[NDIS2] SPEED MODE"
HKR, Ndi\params\SPEED,                      default,        0, 100
HKR, Ndi\params\SPEED,                      type,           0, enum
HKR, Ndi\params\SPEED\enum,                 10,             0, "10M"
HKR, Ndi\params\SPEED\enum,                 100,            0, "100M"
HKR, Ndi\params\SPEED,                      flag,           1, 10,00,00,00
; Duplex Mode
HKR, Ndi\params\FULLDUPLEX,                 ParamDesc,      0, "[NDIS2] DUPLEX MODE"
HKR, Ndi\params\FULLDUPLEX,                 default,        0, 0
HKR, Ndi\params\FULLDUPLEX,                 type,           0, enum
HKR, Ndi\params\FULLDUPLEX\enum,            0,              0, "Half_Duplex"
HKR, Ndi\params\FULLDUPLEX\enum,            1,              0, "Full_Duplex"
HKR, Ndi\params\FULLDUPLEX,                 flag,           1, 10,00,00,00
; Slot Number
HKR, Ndi\params\SLOT,                       ParamDesc,      0, "[NDIS2] SLOT NUMBER"
HKR, Ndi\params\SLOT,                       default,        0, 1
HKR, Ndi\params\SLOT,                       type,           0, int
HKR, Ndi\params\SLOT,                       min,            0, 1
HKR, Ndi\params\SLOT,                       max,            0, 16
HKR, Ndi\params\SLOT,                       flag,           1, 10,00,00,00

; NDIS3 driver parameters:
HKR, ,                                      ReceiveBuffers,     0, "40"
HKR, ,                                      TransmitBuffers,    0, "8"
HKR, ,                                      ReceiveThreshold,   0, "0"
HKR, ,                                      TransmitThreshold,  0, "0"
HKR, ,                                      BurstLength,        0, "1"
HKR, ,                                      MapRegisters,       0, "8"
HKR, ,                                      EarlyReceive,       0, "0"
HKR, ,                                      EarlyTransmit,      0, "0"


;-----------------------------------------------------------------------------
; VT3043 common conection type parameter
;
[FET.con.reg]
; Connection Type
HKR, Ndi\params\ConnectionType,             ParamDesc,      0, "Connection Type"
HKR, Ndi\params\ConnectionType,             default,        0, "0"
HKR, Ndi\params\ConnectionType,             type,           0, "enum"
HKR, Ndi\params\ConnectionType\enum,        0,              0, "Auto-Negotiation"
HKR, Ndi\params\ConnectionType\enum,        1,              0, "100BaseTx Half_Duplex"
HKR, Ndi\params\ConnectionType\enum,        2,              0, "100BaseTx Full_Duplex"
HKR, Ndi\params\ConnectionType\enum,        3,              0, "10BaseT   Half_Duplex"
HKR, Ndi\params\ConnectionType\enum,        4,              0, "10BaseT   Full_Duplex"
HKR, Ndi\params\ConnectionType,             flag,           1, 28,00,00,00
;HKR, Ndi\params\ConnectionType,             flag,           1, 20,00,00,00






;-----------------------------------------------------------------------------
; Installation for Windows
;
[FET.ndis3]
CopyFiles=FET.ndis3.CopyFiles,FET.inf.CopyFiles

[FET.ndis3.CopyFiles]
fetnd4.sys

[FET.inf.CopyFiles]
fetnd4.inf

[FET.ndis2]
CopyFiles=FET.ndis2.CopyFiles

[FET.ndis2.CopyFiles]
fetnd.dos

[FET.odi]
CopyFiles=FET.odi.CopyFiles

[FET.odi.CopyFiles]
fetodi.com

; DestinationDirs
;
[DestinationDirs]

FET.ndis3.CopyFiles      = 11 ; LDID_SYS
FET.ndis2.CopyFiles      = 26 ; LDID_WINBOOT
FET.odi.CopyFiles        = 26
FET.inf.CopyFiles        = 17 ; LDID_INF

[SourceDisksNames]
50="The Fiber Adapter Drivers Directory","",0

[SourceDisksFiles]
fetnd4.sys=50,,10000
fetnd.dos=50,ndis2,fetnd.dos,10000
fetodi.com=50,netware\dosodi,fetodi.com,10000
fetnd4.inf=50,,10000



[Strings]
Msft    = "Microsoft"
; OEM....
Manuf   = "SURECOM"
VT3043.DeviceDesc    = "SURECOM EP-320FX/EP-320FX-C Fast Ethernet Fiber Adapter"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.86