1. ep320xv.exe Driver
2. CLIENT32.TXT File Contents

CLIENT32.TXT Driver File Contents (ep320xv.exe)

*****************************************************************************
*                                                                           *
*           SURECOM EP-320X-V Fast Ethernet 10M/100M PCI Adapter            *
*                                                                           *
*          32 Bit ODI Driver for Client32 in DOS/Windows 3.x/Win95          *
*                                                                           *
*****************************************************************************

Installation:
=============
  1.Client 32 for Win95

    1) Turn the power of your PC on to boot from Windows 95. Windows 95 may
       auto-detect your new adapter install, and the "New Hardware Found"
       dialogue box will appear. Select "Next"->"Finished" to make Win95
       never see this adapter again.

    2) Execute SETUP.EXE from Disk 1 of the Client 32 for Windows 95 software.

    3) When the Network window comes up, remove the components already
       installed, if any. Select "Add adapter" -> "Have Disk..." to install
       driver from the diskette that comes with your lan adapter.

    4) Insert the driver diskette into your floppy drive, and specify the
       path of the driver in the diskette(i.e. A:\NETWARE\CLIENT32) to
       copy the driver files to your system.

    5) You can select "SURECOM EP-320X-V Fast Ethernet Adapter" from the Network
       Components list, and, click "Bindings" to ensure that it binds
       with "IPX 32-Bit Protocol for Novell NetWare Client 32".

    6) When the Client 32 installation is completed, reboot your PC.

  2. Client 32 for DOS/Win3.x

    1) When the Installation program ask you to specify a lan driver, please
       select "OTHER DRIVERS" or "User Supplied Driver" to install driver from
       the diskette that come with your lan adapter.

    2) Insert the driver diskette into your floppy drive, and specify the
       path of the driver in the diskette(i.e. A:\NETWARE\CLIENT32) to copy
       the driver files to your system.

    3) A STARTNET.BAT file will be generated in the Client32 directory.
       (\NOVELL\CLIENT32 or other if you change the default path)

    4) When all the Clinet32 programs installation is completed, reboot your PC.

  System with existing Netware client programs:
  ---------------------------------------------
    If there are Client32 programs installed in your system already, you can
    use the following procedures to setup your driver.
    1) Add a Load driver command line to your STARTNET.BAT file in your
       Client32 directory. For example:

                LOAD C:\NOVELL\CLIENT32\FETNWSRV.LAN FRAME=Ethernet_802.2


       The following is a sample of the STARTNET.BAT file:

                SET NWLANGUAGE=ENGLISH
                C:\NOVELL\CLIENT32\NIOS.EXE
                LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
                LOAD C:\NOVELL\CLIENT32\CMSM.NLM
                LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
                LOAD C:\NOVELL\CLIENT32\FETNWSRV.LAN FRAME=Ethernet_802.2
                LOAD C:\NOVELL\CLIENT32\FETNWSRV.LAN FRAME=Ethernet_802.3
                LOAD C:\NOVELL\CLIENT32\IPX.NLM
                LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM


    2) Execute STARTNET.BAT to connect to Server.