1. ep320xv.exe Driver
2. LMOS2.TXT File Contents

LMOS2.TXT Driver File Contents (ep320xv.exe)

*****************************************************************************
*                                                                           *
*           SURECOM EP-320X-V Fast Ethernet 10M/100M Adapter                *
*                                                                           *
*              NDIS2 Driver for MS LAN MANAGER OS2 Server                   *
*                                                                           *
*****************************************************************************

Installation:
=============

     1) If you install LAN Manager for the first time, you Install LAN Manager
        to your HardDisk by running SETUP.EXE program from the setup diskette.
        Upon completion of the workstation's last disk installation, you
        will be asked if you want to import additional network drivers.
        Answer "YES".

        If you have already installed LAN Manager in your hard disk, run
        SETUP.EXE from HardDisk and select "Actions"->"Import Network Driver"
        option.

     2) Insert the NDIS2 driver diskette into drive 'A' and follow the steps
        on the screen. Select the "SURECOM EP-320X-V Fast Ethernet 10M/100M
        Adapter" card and press "enter", then SETUP.EXE program will copy the
        necessary NDIS2 driver programs from the driver diskette to your hard
        disk, according to LAN MANAGER file structure.

     3) Reboot your computer for the changes to take effect.



Configuration Files:
====================

    Sample of configuration file:
    -----------------------------
    (Suppose the Lan Requester package is installed at C:\NET directory)

    File Name:          C:\CONFIG.SYS
    ----------
        DEVICE=C:\IBMCOM\MACS\FETND.OS2

    File Name:          C:\STARTUP.CMD
    ----------
        NET START SERVER
        @if errorlevel 2 C:\IBMLAN\NETPROG\lserr.exe

    File Name:          C:\IBMCOM\PROTOCOL.INI
    ----------
        [IBMLXCFG]
           ...
           FETND_nif = FETND.nif
           ...
        [NETBEUI_nif]
           ...
           Bindings = FETND_nif
           ...
        [ODI2NDI_nif]
           ...
           Bindings = FETND_nif
           ...
        [TCPIP_nif]
           ...
           Bindings = FETND_nif
        [FETND_nif]
           DriverName    = FETND$
           Iobase        = 0x0300
           Interrupt     = 5

    Custom Keywords:
    ----------------
        FULLDUPLEX                      This keyword is used to enable full
                                        duplex mode.

        SPEED                           This keyword is used to force the
                                        adapter at 10M/100M speed.

        Note: FULLDUPLEX and SPEED should be used together.