32 Bit ODI Driver for Client32 in Windows 95 Install Driver : (Location of driver A:\CLIENT32) ================ 1) Execute SETUP.EXE from Disk 1 of the Client 32 for Windows 95 software. 2) When the Network window comes up, remove the components already installed, if any. Select " Add adapter " -> " Have Disk ..." to install driver from the diskette that comes with your lan adapter. 3) Insert the driver diskette into your floppy drive, and specify the path of the driver in the diskette ( i.e. A:\CLIENT32 ) to copy the driver files to your system. 4) You can select "EP-325 PCI Adapter"from the Network Components list, and then choose " Properties ". In the Properties window, click " Advanced " button to configure the special functions provided by the adapter. Please refer to the next section , "Configuration Parameters", to setup the parameters. Click "ODI Driver" botton to make sure it is in 32 Bit mode. And , click "Bindings" to ensure that it binds with"IPX 32-Bit Protocol for Novell NetWare Client 32". 5) When the Client 32 installation is completed, reboot your PC.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.