Windows for Workgroups v3.11 Install driver: ( Location of driver : \WFW311\EP325.386 ) ---------------- 1. In the Network Group. Select the "Network Setup" -> "Driver" -> " Add adapter " -> "Unlisted of Updated Nwtwork Adapter ". 2. Insert the adapter driver disk in drive A and specify the path A:\WFW311 for the location of the driver. 3. Close, and when prompted, restart your computer so that changes take affect. NOTES: ------ 1. Parameters for the PROTOCOL.INI file: AdapterID : This keyword is provided by EP325, and is required when more than one EP325 adapters exist on one system. 2. Installing Multiple LAN Adapters: There are two different method to complete it: (a) Under DOS mode, you can modify the AdapterID in file C:\WFW311\PROTOCOL.INI by yourself. (b) Or you can enter Windows for WorkGroup and follow above setup procedure step 2,then click on "Setup.."button,select " Advanced... ", fill AdapterID in Value item. Last step to select OK and close NETWORK SETUP.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.