LAN Server 4.0
Location of Driver: \NDIS\DOS\LAN_S4\EP325.DOS (for DOS LAN Services)
\NDIS\OS2\EP325.OS2 (for OS/2 LAN Server)
Installing driver procedure on DOS LAN Requester :
1. Copy EP325.DOS from your Driver diskette (A:\NDIS\DOS\LAN_S4)
to DOS LAN Services subdirectory C:\DLS .
2. Under DOS LAN Requester subdirectory C:\DLS, run INSTALL
3. The screen display some description. If it's correct, move
highlight to "The listed options are correct" item ,then ->
"Network Card" -> "Change driver for network card." -> "Network
card not shown in list below.." .
4. Insert the SureCom EP325 driver diskette in floppy A,and specify
your pathname A:\NDIS\DOS\LAN_S4,then press ENTER.
5. Reboot your computer.
NOTES:
Parameters for the PROTOCOL.INI file:
AdapterID : This keyword is provided by EP325, and is required
when more than one EP325 adapters exist on one
system.
-----------------------------------------------------------------------
Installing driver procedure on OS/2 LAN Server 4.0:
1. In OS/2 window, Click the "MPTS" icon.-> "OK" -> "Install" .
2. Insert the SureCom EP325 driver diskette, specify the driver
path A:\NDIS\OS2 and press <Enter>.
3. When complete above step to load EP325.OS2 into OS/2 system,
then configure your system.
4. Select "Configure" button.
5. The screen will display "Configure" dialog box and select "LAN
adapters and protocols" then press "configure" button.
6. The screen will display "LAPS Configuration" dialog box, move
highlight to "EP325 PCI Ethernet Adapter" item in "Network
Adapter" window, and select "NetBios" protocol. Press "OK".
7. Installation is complete now. Reset your PC by turning it off
and on.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.