Linux ( kernel 1.2.13 ) Installation guide for SURECOM EP-325 Adapter --------------------------------------------------------------------- Hint:RTL8029 is ne2000 compatable. step 1: make sure that kernel source code is included (check /usr/src/linux) step 2: recompile kernel: cd to /usr/src/linux, them type 'make menuconfig' select the following options(mark them as '*') .enable module support .networking support .TCP/IP networking .network device support .ethernet .ne2000/ne1000 support step 3: after options are selected, exit and run make dep;make clean;make zImage; if no serious error happens, the new kernel 'zImage' will be in /usr/src/linux/arch/i386/boot/zImage. copy this file to root. modify '/etc/lilo.conf' file to point to this new file. run 'lilo' reboot step 4: when system boots, the driver will be load. check the /proc/pci file if RTL8029 device is detected. step 5: run netconfig to setup TCP/IP (run 'ifconfig' or 'netstat -i' to see if there is a interface 'ne0')Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.