1. ep312.exe Driver
2. MSWFW311.TXT File Contents

MSWFW311.TXT Driver File Contents (ep312.exe)

   Windows for Workgroups v3.11

   Introduction:
   -------------
   This document describes the procedure to install  Microsoft Windows for
   Workgroups v3.11 driver for SURECOM EP-312 ISA PnP Ethernet Adapter.

   LOCATION OF DRIVER:     \WFW311\PNPND.386


   Setup Procedure:
   ----------------
      After you run into Windows for Workgroup 3.11:

      1. Select the "Network Setup" icon in the Network Group.

      2. Click on the "Drivers..." button.

      3. If  you  are  replacing a previous LAN adapter select  the Remove
         button to delete that adapter.

      4. Click on the "Add Adapter" button.

      5. Choose Unlisted or Updated Network Adapter.

      6. Insert the adapter driver disk in drive "A" and specify  the path
         A:\WFW311 for the location of the driver.

      7. Close , and when prompted , restart your computer so that changes
         take affect.


   NOTES:
   ------
      1. Parameters for the PROTOCOL.INI file:

         AdapterID : This  keyword is provided  by EP-312, and is  required
                     when more than one EP-312 adapters exist on one system.

      2. Installing Multiple LAN Adapters:
         There are two different method to complete:
         (a) Under  DOS   mode ,  you  can  modify  the  AdapterID in file
             C:\WFW311\PROTOCOL.INI by yourself.
         (b) Or you can enter Windows for WorkGroup and follow above setup
             procedurc  step 2 , then click on  "Setup.."  button , select
             "Advanced..." , fill AdapterID  in Value item.  Last  step to
             select OK and close NETWORK SETUP.

      3. Sample PROTOCOL.INI:
         Windows for Workgroups creates the PROTOCOL.INI for you.  This is
         provided for  reference.  This is a sample with Microsoft Netbeui
         and IPX/SPX Compatible Transport with Netbios.

         [network.setup]
         version=0x3110
         netcard=PNPND,1,PNPND,3
         transport=ms$nwlinknb,NWLINK
         transport=ms$ndishlp,MS$NDISHLP
         transport=ms$netbeui,NETBEUI
         lana0=PNPND,1,ms$netbeui
         lana1=PNPND,1,ms$nwlinknb
         lana2=PNPND,1,ms$ndishlp


         [protman]
         DriverName=PROTMAN$
         PRIORITY=MS$NDISHLP

         [PNPND]
         DriverName=PNPND$
         AdapterID=@000021000001

         [PNPND]
         Adapters=PNPND

         [NWLINK]
         BINDINGS=PNPND

         [MS$NDISHLP]
         DriverName=ndishlp$
         BINDINGS=PNPND

         [NETBEUI]
         DriverName=netbeui$
         SESSIONS=10
         NCBS=12
         BINDINGS=PNPND
         LANABASE=0