1. ep312.exe Driver
2. LANTAS60.TXT File Contents

LANTAS60.TXT Driver File Contents (ep312.exe)

   LANtastic 6.0

   Introduction:
   -------------
        This document describes the procedure to setup NDIS driver on
        LANtastic 6.0 operation system for SURECOM EP-312 ISA PnP
        Ethernet Adapter.


   Location of Driver:     \NDIS\DOS\PNPND.DOS


   Sample Configuration Files:
   --------------------------
         CONFIG.SYS:

         DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
         DEVICE=C:\LANTASTI\PNPND.DOS
         FILES=40
         BUFFERS=30


         STARTNET.BAT:

         @echo off
         rem LANtastic  Version 6.00  installed 95/05/23 14:11:21
         rem (for Windows)
         C:
         cd C:\LANTASTI
         SET LAN_CFG=C:\LANTASTI
         rem If LANtastic is disabled, skip everything.
         IF EXIST DISABLED GOTO :STARTNET_DONE
         @echo ===== Begin LANtastic configuration =====
         PATH C:\LANTASTI;C:\LANTASTI\NW;%PATH%
         SET LAN_DIR=C:\LANTASTI.NET
         SET NWDBPATH=C:\LANTASTI\NW
         rem Please obtain the NETBEUI.EXE program from Microsoft
         LOADHIGH NETBEUI
         LOADHIGH AI-NDIS BIND_TO=RTL8019_NIF
         AILANBIO @STARTNET.CFG
         REDIR TEST @STARTNET.CFG
         IF EXIST NOSHARE GOTO :NOSHARE
         SERVER C:\LANTASTI.NET @STARTNET.CFG
         NET LOGIN \\TEST
         GOTO :CONTINUE
         :NOSHARE
         @echo LANtastic server was installed but turned off.
         :CONTINUE
         rem If CONNECT.BAT exists, run it to set up connections.
         IF EXIST CONNECT.BAT GOTO :CONNECT
         rem Otherwise set up connections specified during install.
         NET LPT TIMEOUT 10
         GOTO :CONNECT_DONE
         :CONNECT
         @echo Setting up LANtastic connections from CONNECT.BAT
         rem Build CONNECT.BAT like this: "NET SHOW/BATCH >
         C:\LANTASTI\CONNECT.BAT"
         rem   (or run the batch file SETNET.BAT)
         call CONNECT.BAT
         :CONNECT_DONE
         NET POSTBOX
         @echo ===== End LANtastic configuration =====
         :STARTNET_DONE
         cd \


         PROTOCOL.INI:

         ;PROTOCOL.INI for LANtastic Version 6.00
         ;------------ using
         ;
         [PROTMAN]
           DRIVERNAME = PROTMAN$
           DYNAMIC = YES

         [RTL8019_NIF]
             DRIVERNAME = PNPND$
             Adapters=PNPND
             AdapterID=@0123456789

   Install SureCom drivers for LANtastic 6.0 : (Using NDIS driver)
   ------------------------------------------
      The  installation  procedure  will  transfer  files  to a  specific
      directory on the workstation and modify existing configuration files
      to fit your specific needs.  The installation utility INSTALL.EXE is
      located on LANtastic Network Software Disk 1.   Run INSTALL.EXE from
      Disk 1  and  the  LANtastic  Install program screen will appear. You
      must  complete each of the questions.  These options are specific to
      your needs.

      1. Prompt you to enter a unique Computer Name.

      2. Ask  you to  select  the  drive  that  you  want  LANtastic to be
         installed on. The default is Drive C:.

      3. Ask  you to  specify  a directory  where  you want  the LANtastic
         files to be installed. The default is \LANTASTI.

      4. Ask  you if you want to Share your Computers Drives  or Printers.

      5. Ask  you to select  the  Maximum  Number  of Connected Computers.

      6. Prompt  you to  select any other LANtastic features that you  may
         want to install.

      7. A  summary  screen  of  the  options you will appear. If it looks
         correct  continue  with  the  installation.

      8. Prompt  you to select a  network  adapter  to  run your LANtastic
         software on. From the list of adapters , select
         "NDIS SUPPORT FOR NETWORK ADAPTERS".

      9. Ask you to insert the  manufacturers  driver  diskette containing
         the driver  files. Insert the EP312 driver diskette into drive A:
         and specify the source path for driver files as A:\NDIS\DOS

      10. Ask you if you want to Setup Permanent Drive or Printer Connections.

      11. Another summary screen of the  options will appear.If this looks
          correct then select Perform the Installation  and LANtastic will
          now install the files.

      12. When complete the installation, then reboot your system.