1. 2000pnp.exe Driver
2. README File Contents

README Driver File Contents (2000pnp.exe)

****************************************************************************
*                                                                          *
*                      ATI AT-2000PNP Ethernet Adapter                     *
*                                                                          *
*                           Windows 95 Driver                              *
*                                                                          *
*                               Ver. 7.10                                  *
*                                                                          *
*                              README file                                 *
*                                                                          *
****************************************************************************

1. Introduction:

   This Ethernet NDIS driver supports Microsoft Windows 95 environment.


2. Contents of the Subdirectory:

      AT2000M.SYS       The driver for Windows 95.

      PNPND.DOS         The NDIS2 driver.

      PNPND.COM         The ODI DOS driver.

      NEATI20.INF       Setup file for Windows 95.


3. Installation:

   * For Windows 95

     1) Install your Card on your PC system following
        the procedure described in your installation manual.

     2) Power up your PC to start Windows 95.

     3) When the "New Hardware Found" panel appears, select "Driver
        from disk provided by hardware manufacturer" to install the
        Win 95 driver from our Ethernet Driver Disk.

     4) When the "Install from Disk" panel appears, insert our Ethernet
        Driver Disk to any floppy on your system. Then specify the path
        where the driver exists (e. g., A:\WIN95 or B:\WIN95), and
        select OK.

     5) When the driver installation is completed, restart Windows 95.

     6) When the driver installation is completed, check if the network
        component "File and printer sharing for Microsoft Network" is
        installed.  If not, do the following to add it.

        This is to ensure other users on the network can connect to you.

        a) Click the "Network" icon in the Control Panel.

        b) Click the "Add" button in the Network panel.

        c) From the panel that can let you click the type of network
           component you want to install, choose "Sevice".

        d) When the "Select Network Service" panel appears, choose
           "Microsoft" as the manufacturer and "File and printer sharing
           for Microsoft Network" as the network services, then click
           the OK button.

        e) Restart Windows 95.