**************************************************************************** * * * ATI AT-2000PNP Ethernet Adapter * * * * Packet Driver * * * * Ver. 1.32 * * * * README file * * * **************************************************************************** 1. Introduction This Ethernet Packet driver conforms to FTP Software Public Domain Packet Driver Specification Revision 1.09 (Sep. 15, 1989). It supports many network applications, such as FTP Software PC/TCP, NCSA TCP/IP, Wollongong Pathway Access and NetWare for DOS workstations. 2. Contents of the Subdirectory PNPPD.COM The Packet driver for the AT-2000PNP Ethernet Adapter. 3. Installation 1) Install the AT-2000PNP Ethernet Adapter on your PC system following the procedure described in your installation manual. 2) Install the network operating system you are going to use. 3) Copy PNPPD.COM to the directory that is created while you are installing your network system. 4) Follow the instructions given in your network application menu to alter your system configuration file, then reboot the PC. 5) Do one of the following to load PNPPD.COM. - If the Operating Mode in DIAG has been set as Plug & Play mode, you should type as follows at the DOS prompt: PNPPD Packet_Int where: Packet_Int The software interrupt number. The range is from 0x60 to 0x80 (Hex). This is a compulsory parameter. The default is 0x60. - If the Operating Mode in DIAG has been set as Jumperless mode, you should type as follows at the DOS prompt: PNPND Packet_Int [IRQ_NO] [IO_BASE] where: Packet_Int The software interrupt number. The range is from 0X60 to 0X80 (Hex). This is a compulsory parameter. IRQ_NO The network adapter interrupt request line. The valid range is from 2 to 15 and the default is 3. This is optional. IO_BASE The I/O port address of the network adapter. The valid range is from 200h to 3E0h. This is optional. 4. Unload To remove the packet driver from the main memory, run PNPPD with '-u' at the DOS prompt, as shown below. PNPPD -u <Packet_Int> where: Packet_Int The software interrupt number specified during installation. This is a compulsory parameter.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.