1. 2000pnp.exe Driver
2. README File Contents

README Driver File Contents (2000pnp.exe)

****************************************************************************
*                                                                          *
*                     ATI AT-2000PNP Ethernet Adapter                      *
*                                                                          *
*                 LANtastic AI-LANBIOS Compatible Driver                   *
*                                                                          *
*                              README file                                 *
*                                                                          *
****************************************************************************

1. Introduction:

   This Ethernet LANtastic AI-LANBIOS Compatible Driver supports 802.3 and
   XEROX frame type.  Ensure that you have an adapter-independent version
   of the LANtastic product and the LANtastic NOS/AI, since AE-2 LANtastic
   v3.02 or later can no longer work with non-Artisoft hardware.


2. Contents of the Subdirectory:

      PNPLAN5.EXE     The LANtastic AI-LANBIOS compatible driver that
                      supports AILANBIOS v4.04 specification.  It works
                      with LANtastic v5.00 and LANtastic v6.00.


3. Installation

   1) Install the PNP Card on your system, following the procedure de-
      scribed in your Ethernet adapter user's manual.

   2) Install the LANtastic product following the instructions in your
      LANtastic Network Operating System User Manual.

   3) When you are asked to select the type of your LAN adapter, choose
      "NEX016 Novell NE2000 16-bit ISA Bus or Compatible".

   4) When the installation is completed, edit STARTNET.BAT to replace the
      line "NEX000..." with "PNPLAN5 VERBOSE", as the following example
      shown:
                .
                .
                ( SHARE /L:200 )

                PNPLAN5 VERBOSE
                AILANBIOS
                REDIR PCNAME LOGINS=3

                ( SERVER )
                NET LOGIN \\SERVER USER
                .
                .

    5) Copy PNPLAN5.EXE from the Ethernet Driver Disk to your \LANTASTI
       subdirectory.

    6) Run STARTNET.BAT to start LANtastic NOS.


4. Unload

   To unload this driver, firstly remove the AILANBIOS, then remove the
   driver, as shown below:
                 .
                 .
                 AILANBIOS REMOVE
                 PNPLAN5 REMOVE